AutoCodes – Isuzu – P0353 Isuzu

P0353 Isuzu Code - Ignition Coil 3 Control Circuit

Quick Answer

The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0353 Isuzu indicates Ignition Coil 3 Control Circuit.
Common causes: Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,682

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0353 Isuzu Description

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.

OBDII Code P0353 Isuzu - Ignition Coil 3 Control Circuit - AutoCodes.com — P0353 Isuzu Code - Ignition Coil 3 Control Circuit

What does this mean?

What are the Possible Causes of the DTC P0353 Isuzu?

Faulty Ignition Coil 3
Ignition Coil 3 harness is open or shorted
Ignition Coil 3 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0353 Isuzu?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0353 Isuzu code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0353 Isuzu code?

Need more information on how to fix the P0353 Isuzu code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0353 Isuzu code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0353 Isuzu Code

1. What are the common symptoms of OBDII code P0353 in an Isuzu vehicle?

- Common symptoms include engine misfires, rough idle, lack of power, and illuminated Check Engine Light.

2. What does the OBDII code P0353 for an Isuzu indicate?

- OBDII code P0353 indicates a problem with the ignition coil 3 control circuit in the vehicle.

3. What are the possible causes of OBDII code P0353 in an Isuzu?

- Possible causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or a problem with the Engine Control Module (ECM).

4. How can I diagnose the ignition coil 3 control circuit issue in my Isuzu when experiencing code P0353?

- You can use a multimeter to test the resistance of the ignition coil, inspect the wiring and connectors for any damage, and perform a scan tool test to check for ECM communication.

5. Can a bad spark plug cause OBDII code P0353 in an Isuzu?

- Yes, a bad spark plug can potentially lead to a misfire in the corresponding cylinder, triggering the ignition coil 3 control circuit code.

6. Is it safe to continue driving my Isuzu with OBDII code P0353 present?

- It is not recommended to drive the vehicle with OBDII code P0353, as it can lead to engine performance issues and potential damage if left unresolved.

7. How can I repair OBDII code P0353 in my Isuzu?

- To repair OBDII code P0353, you may need to replace the faulty ignition coil, repair any damaged wiring or connectors, or address any issues with the ECM.

8. Can I reset OBDII code P0353 in my Isuzu using a scan tool?

- Yes, you can use a scan tool to clear the code after addressing the underlying issue causing OBDII code P0353 in your Isuzu.

9. Will OBDII code P0353 in an Isuzu reset on its own after a certain number of drive cycles?

- OBDII code P0353 may reset on its own after a certain number of drive cycles if the underlying issue has been resolved and the ECM no longer detects the fault.

10. How can regular maintenance help prevent OBDII code P0353 from occurring in my Isuzu?

- Regular maintenance, including periodic inspection of ignition components and timely replacement of spark plugs and ignition coils, can help prevent OBDII code P0353 in your Isuzu.