P0353 DODGE Code - Ignition Coil 3 Circuit
|P0353 DODGE code possible causes
- Faulty Ignition Coil 3
- Ignition Coil 3 harness is open or shorted
- Ignition Coil 3 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
|How do I fix the P0353 DODGE code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|Cost of diagnosing the P0353 DODGE code
Labor: 1.0The cost of diagnosing the P0353 DODGE code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the P0353 DODGE code detected?Each ignition circuit is continuously monitored by the Engine Control Module (ECM). The test fails when the ECM does not receive a valid pulse signal from the ignition coil.
|What are P0353 DODGE code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of Power
- Engine may be harder to start
- Engine hesitation
- Rough engine idle
|P0353 DODGE code descriptionThe ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
|Need more information with the P0353 DODGE code?Need more information on how to fix the P0353 DODGE code? Get Access to Factory Service Manuals
|Need help with a P0353 DODGE code?Get the P0353 Dodge code diagnosed by a professional: Find a repair shop in your area
|P0353 DODGE code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0353 Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks