AutoCodes – Honda – P0353 2018 Honda CR-V

P0353 2018 Honda CR-V Code - No. 3 Cylinder Ignition Coil Circuit Malfunction

Quick Answer

The ignition coil is a part of the engine ignition system. Common causes include Faulty No, 3 Ignition Coil, No. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0353 2018 Honda CR-V indicates No. 3 Cylinder Ignition Coil Circuit Malfunction.
Common causes
Common causes include Faulty No, 3 Ignition Coil, No.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 222
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 17, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0353 2018 Honda CR-V Description

The ignition coil is a part of the engine ignition system. It converts low voltage from the battery into high voltage needed to create a spark in the spark plugs. The ignition coil is triggered at the optimum time by the Powertrain Control Module (PCM) ON/OFF command. The PCM detects a malfunction when the engine is running and the return signal does not change for a specified time, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).
OBDII Code P0353 2018 Honda CR-V - No. 3 Cylinder Ignition Coil Circuit Malfunction - AutoCodes.com
P0353 2018 Honda CR-V Code - No. 3 Cylinder Ignition Coil Circuit Malfunction

What are the Possible Causes of the DTC P0353 2018 Honda CR-V?

  • Faulty No. 3 Ignition Coil
  • No. 3 Ignition Coil harness is open or shorted
  • No. 3 Ignition Coil circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0353 2018 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0353 2018 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0353 2018 Honda CR-V code?

Need more information on how to fix the P0353 2018 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0353 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0353 2018 Honda CR-V Code

What does the OBDII code P0353 mean on a 2018 Honda CR-V?

P0353 indicates a malfunction in the ignition coil circuit for cylinder No. 3, meaning the ECU has detected an issue with the coil's electrical performance.

What are the common symptoms of P0353 in a 2018 Honda CR-V?

Symptoms may include the check engine light turning on, rough idling, misfires, poor acceleration, reduced fuel efficiency, and possible engine stalling.

What causes the P0353 code on a 2018 Honda CR-V?

Common causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, a bad spark plug, or a malfunctioning engine control unit (ECU).

Can I drive my 2018 Honda CR-V with a P0353 code?

Driving with this code is not recommended, as it can lead to engine misfires, reduced performance, and potential long-term damage to the catalytic converter.

How do I diagnose a P0353 code on my 2018 Honda CR-V?

Start by checking for loose or damaged wiring and connectors in the No. 3 ignition coil circuit. Then test the ignition coil and spark plug for proper function using a multimeter or replacement.

What tools do I need to fix the P0353 code on a 2018 Honda CR-V?

You may need a scan tool, multimeter, spark plug socket, basic hand tools, and possibly a replacement ignition coil or spark plug.

How much does it cost to repair the P0353 code on a 2018 Honda CR-V?

The cost depends on the issue. Replacing a single ignition coil can cost $50-$150 for parts, plus labor if done by a mechanic. Diagnosing wiring issues may incur additional costs.

Can a bad spark plug cause the P0353 code on my 2018 Honda CR-V?

Yes, a faulty spark plug in cylinder No. 3 can cause the ignition coil to malfunction, triggering the P0353 code.

Is replacing the ignition coil the only solution for a P0353 code on a 2018 Honda CR-V?

No, while a faulty ignition coil is a common cause, you should also inspect the wiring, connectors, and spark plug before replacing any parts.

How do I clear the P0353 code after making repairs on my 2018 Honda CR-V?

Use an OBDII scan tool to clear the code after completing repairs. Drive the vehicle to ensure the issue is resolved and the code does not return.

Discuss the causes and fixes for P0353 2018 Honda CR-V OBDII Code

Code P0353 2018 Honda CR-V comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play