AutoCodes – Toyota – P0353 2009 Toyota Prius

P0353 2009 Toyota Prius Code - Ignition Coil 3 Primary/Secondary Circuit

Quick Answer

The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0353 2009 Toyota Prius indicates Ignition Coil 3 Primary/Secondary Circuit.
Common causes
Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,507
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0353 2009 Toyota Prius Description

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
OBDII Code P0353 2009 Toyota Prius - Ignition Coil 3 Primary/Secondary Circuit - AutoCodes.com
P0353 2009 Toyota Prius Code - Ignition Coil 3 Primary/Secondary Circuit

What are the Possible Causes of the DTC P0353 2009 Toyota Prius?

  • Faulty Ignition Coil 3
  • Ignition Coil 3 harness is open or shorted
  • Ignition Coil 3 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0353 2009 Toyota Prius?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0353 2009 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0353 2009 Toyota Prius code?

Need more information on how to fix the P0353 2009 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0353 2009 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0353 2009 Toyota Prius Code

1. What does OBDII code P0353 on a 2009 Toyota Prius indicate?

The code P0353 specifically points to an issue with the Ignition Coil 3 Primary/Secondary Circuit in the vehicle's ignition system.

2. What are the common symptoms of a P0353 error in a 2009 Toyota Prius?

Common symptoms include engine misfires, rough idling, loss of power, and potentially, the illumination of the Check Engine Light on the dashboard.

3. What are the possible causes of OBDII code P0353 in a 2009 Toyota Prius?

The main causes of code P0353 can include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or issues with the Engine Control Module (ECM).

4. How can I diagnose the Ignition Coil 3 Primary/Secondary Circuit issue in my 2009 Toyota Prius?

A thorough diagnosis involves checking the ignition coil, inspecting the wiring and connectors for any damage or corrosion, and using a scan tool to analyze live data and confirm the specific fault.

5. Can I continue driving my 2009 Toyota Prius with a P0353 error code?

It is not recommended to drive the vehicle with a P0353 error, as it can lead to more severe engine problems and potential damage if left unresolved.

6. What is the typical repair process for fixing a P0353 error in a 2009 Toyota Prius?

The repair process usually involves replacing the faulty ignition coil, repairing or replacing damaged wiring or connectors, and clearing the error code with a diagnostic tool.

7. Are there any preventive maintenance tips to avoid encountering a P0353 error in a 2009 Toyota Prius?

Regularly scheduled maintenance, such as checking and replacing ignition components as recommended by the manufacturer, can help prevent issues like the P0353 error code from occurring.

8. How much does it cost to repair a P0353 error in a 2009 Toyota Prius?

The cost of repair can vary depending on factors like the labor rates in your area, the price of parts, and whether you choose to do the repair yourself or take it to a professional mechanic.

9. Can a DIY enthusiast repair a P0353 error in a 2009 Toyota Prius?

Depending on your skill level and access to tools, it is possible to repair a P0353 error yourself. However, if you're unsure or inexperienced, it's best to seek professional help to ensure the issue is properly resolved.

10. Will resetting the error code resolve the P0353 issue in a 2009 Toyota Prius?

Simply resetting the error code may temporarily clear the Check Engine Light, but it won't fix the underlying problem causing the P0353 error. It's crucial to diagnose and repair the root cause to prevent future issues.

Discuss the causes and fixes for P0353 2009 Toyota Prius OBDII Code

Code P0353 2009 Toyota Prius comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play