AutoCodes – Toyota – P0353 2008 Toyota Prius

P0353 2008 Toyota Prius Code - Ignition Coil 3 Primary/Secondary Circuit

Quick Answer

The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0353 2008 Toyota Prius indicates Ignition Coil 3 Primary/Secondary Circuit.
Common causes
Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,379
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0353 2008 Toyota Prius Description

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
OBDII Code P0353 2008 Toyota Prius - Ignition Coil 3 Primary/Secondary Circuit - AutoCodes.com
P0353 2008 Toyota Prius Code - Ignition Coil 3 Primary/Secondary Circuit

What are the Possible Causes of the DTC P0353 2008 Toyota Prius?

  • Faulty Ignition Coil 3
  • Ignition Coil 3 harness is open or shorted
  • Ignition Coil 3 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0353 2008 Toyota Prius?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0353 2008 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0353 2008 Toyota Prius code?

Need more information on how to fix the P0353 2008 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0353 2008 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0353 2008 Toyota Prius Code

What does the OBDII code P0353 mean for a 2008 Toyota Prius?

P0353 indicates a problem with the ignition coil #3 primary/secondary circuit, suggesting that there's an issue with the electrical signal to or from the ignition coil.

What are the common symptoms associated with the P0353 code?

Common symptoms include engine misfires, rough idling, decreased fuel efficiency, and illuminated check engine light.

What could cause the P0353 code to trigger?

Causes may include a faulty ignition coil #3, damaged wiring or connectors, poor electrical connections, or a malfunctioning engine control unit (ECU).

How can I diagnose the P0353 code?

You can diagnose it by using an OBDII scanner to confirm the code, checking the ignition coil and its wiring for damage, and testing the ignition coil with a multimeter for proper resistance.

What should I check first when troubleshooting P0353?

Start by inspecting the ignition coil #3 and its wiring for any visible damage, corrosion, or loose connections, as these are common issues.

Can I drive my 2008 Toyota Prius with the P0353 code?

While you can drive the vehicle, it is not recommended as it may lead to poor performance and potential engine damage due to misfires.

What is the typical cost to repair the P0353 code?

Repair costs can vary but typically range from $100 to $300, including parts and labor, especially if the ignition coil needs replacement.

Is it necessary to replace all ignition coils if I have a P0353 code?

It is not necessary to replace all ignition coils unless they show signs of wear or failure; however, replacing all can be a preventive measure if they are old.

How can I clear the P0353 code after repairs?

You can clear the code using an OBDII scanner by selecting the option to erase codes, or by disconnecting the battery for a few minutes, but ensure the underlying issue is fixed first.

What should I do if the P0353 code returns after repair?

If the code reappears, recheck the ignition coil and wiring, inspect the ECU, and consider having a professional technician perform a more thorough diagnosis.

Discuss the causes and fixes for P0353 2008 Toyota Prius OBDII Code

Code P0353 2008 Toyota Prius comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play