AutoCodesFord – P0353 2006 Ford Fusion

P0353 2006 Ford Fusion Code - Ignition Coil 'C' Primary/Secondary Circuit

Quick Answer

The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0353 2006 Ford Fusion indicates Ignition Coil 'C' Primary/Secondary Circuit .
Common causes
Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,721
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 29, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0353 2006 Ford Fusion Description

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
OBDII Code P0353 2006 Ford Fusion - Ignition Coil 'C' Primary/Secondary Circuit  - AutoCodes.com
P0353 2006 Ford Fusion Code - Ignition Coil 'C' Primary/Secondary Circuit

What are the Possible Causes of the DTC P0353 2006 Ford Fusion?

  • Faulty Ignition Coil 3
  • Ignition Coil 3 harness is open or shorted
  • Ignition Coil 3 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0353 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0353 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0353 2006 Ford Fusion code?

Need more information on how to fix the P0353 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0353 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0353 2006 Ford Fusion Code

What does the OBDII code P0353 mean for a 2006 Ford Fusion?

The code P0353 indicates a malfunction in the ignition coil 'C' primary or secondary circuit, which may cause misfires or drivability issues.

What are the common symptoms of P0353 in a 2006 Ford Fusion?

Symptoms may include engine misfires, rough idling, reduced power, poor fuel economy, and the check engine light illuminating.

What causes the P0353 code to appear?

Common causes include a faulty ignition coil 'C', damaged wiring or connectors in the ignition coil circuit, or a malfunctioning powertrain control module (PCM).

Can I drive my 2006 Ford Fusion with the P0353 code?

Driving with this code is not recommended as it may cause further engine damage, poor performance, and increased emissions.

How do I diagnose the P0353 code?

Start by inspecting the ignition coil 'C', checking its wiring and connectors for damage, testing the coil with a multimeter, and verifying signal continuity to the PCM.

How can I fix the P0353 code on a 2006 Ford Fusion?

Repairs may involve replacing the faulty ignition coil 'C', repairing or replacing damaged wiring or connectors, and in rare cases, reprogramming or replacing the PCM.

How much does it cost to repair the P0353 code?

The cost varies but typically ranges from $100 to $300 for parts and labor, depending on whether the ignition coil or wiring needs replacement.

What is ignition coil 'C' in a 2006 Ford Fusion?

Ignition coil 'C' refers to the coil associated with the third cylinder in the engine’s firing order.

Can a bad spark plug cause the P0353 code?

Yes, a faulty or worn spark plug in cylinder 3 can cause excessive stress on the ignition coil and trigger the P0353 code.

Does the P0353 code mean I need to replace all ignition coils?

Not necessarily. Only the faulty ignition coil 'C' needs to be replaced unless others are showing signs of wear or failure.

Discuss the causes and fixes for P0353 2006 Ford Fusion OBDII Code

Code P0353 2006 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play