| All About OBDII Engine Codes
AutoCodes - Buick - P0352 BUICK

P0352 BUICK Code - Ignition Coil 2 Control Circuit

- Code Popularity: 3,756 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 2/3
Table of contents
By - Updated Jun 16, 2022
Share on Facebook   Share on Twitter   Share on Linkedin

|P0352 BUICK code possible causes

  • Faulty Ignition Coil 2
  • Ignition Coil 2 harness is open or shorted
  • Ignition Coil 2 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

|How do I fix code P0352 BUICK code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your car have Safety Recalls? → Check here

|Cost of diagnosing P0352 BUICK code

Labor: 1.0

The cost of diagnosing the P0352 BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are P0352 BUICK code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Lack/Loss of Power
  • Engine may be harder to start
  • Engine hesitation
  • Rough engine idle

|P0352 BUICK code description

The ignition system on this engine uses ignition coils with integrated power transistors. The Engine Control Module (ECM) controls the spark event for each cylinder through individual ignition coil control circuits. When the ECM commands the ignition control circuit On, electrical current flows through the primary winding of the ignition coil, creating a magnetic field. When a spark event is requested, the ECM commands the ignition control circuit Off, interrupting current flow through the primary winding. The collapsing magnetic field created by the primary winding induces a high voltage in the secondary winding, which is connected to the spark plugs. The Diagnostic Trouble Code (DTC) will be set when the control circuit commanded by the ECM state does not match the actual state.

OBDII Code p0352 buick - Ignition Coil 2 Control Circuit -
P0352 BUICK Code - Ignition Coil 2 Control Circuit

|Need more information with the P0352 BUICK code?

Need more information on how to fix the P0352 BUICK code? Get Access to Factory Service Manuals

|Need help with a P0352 BUICK code?

Get the p0352 buick code diagnosed by a professional: Find a repair shop in your area

|P0352 BUICK code comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the p0352 buick code? Have you replaced any parts?
Any information is appreciated. Thanks