P0352 2015 Toyota RAV4 Code - Ignition Coil 2 Primary/Secondary Circuit
Quick Answer
A Direct Ignition System (DIS) is a 1-cylinder ignition system in which each cylinder is ignited by one ignition coil assembly and one spark plug is connected to the end of each secondary wiring. Common causes include Faulty Ignition Coil 2, Ignition Coil 2 harness is open or shorted, Ignition Coil 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0352 2015 Toyota RAV4 indicates Ignition Coil 2 Primary/Secondary Circuit.
- Common causes
- Common causes include Faulty Ignition Coil 2, Ignition Coil 2 harness is open or shorted, Ignition Coil 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0352 2015 Toyota RAV4 Description
The Engine Control Module (ECM) determines the ignition timing and transmits the ignition (IGT) signals to each cylinder. Using the IGT signal, the ECM turns the power transistor inside the igniter on and off. The power transistor, in turn, switches the current supplied to the primary coil on and off. When the current to the primary coil is cut off, a powerful voltage is generated in the secondary coil. This voltage is applied to the spark plugs, causing them to spark inside the cylinders. As the ECM cuts the current to the primary coil, the igniter sends back an ignition confirmation (IGF) signal to the ECM for each cylinder ignition.
If the ECM does not receive any IGF signals despite transmitting the IGT signal, it interprets this as a fault in the igniter and stores a Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P0352 2015 Toyota RAV4?
- Faulty Ignition Coil 2
- Ignition Coil 2 harness is open or shorted
- Ignition Coil 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0352 2015 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0352 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0352 2015 Toyota RAV4 code?
Need more information on how to fix the P0352 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0352 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0352 2015 Toyota RAV4 Code
1. What does the OBDII code P0352 mean on a 2015 Toyota RAV4?
P0352 indicates an issue with the ignition coil circuit for cylinder 2, either in the primary or secondary circuit.
2. What are the symptoms of code P0352 in a 2015 Toyota RAV4?
Common symptoms include engine misfires, rough idling, reduced power, poor fuel economy, and the Check Engine Light being illuminated.
3. What causes the P0352 code on a 2015 Toyota RAV4?
The most common causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or a malfunctioning Engine Control Module (ECM).
4. Can I drive my 2015 Toyota RAV4 with the P0352 code?
Driving with this code is not recommended as it can lead to poor performance, increased emissions, and possible damage to the catalytic converter over time.
5. How do I diagnose the P0352 code on my 2015 Toyota RAV4?
Start by inspecting the ignition coil for cylinder 2, checking for visible damage or corrosion. Then test the wiring and connectors for continuity and the proper voltage.
6. How do I fix the P0352 code on a 2015 Toyota RAV4?
Common fixes include replacing the ignition coil for cylinder 2, repairing or replacing damaged wiring or connectors, or, in rare cases, replacing the ECM.
7. How much does it cost to repair the P0352 code on a 2015 Toyota RAV4?
Replacing an ignition coil typically costs $100-$250, including parts and labor. Additional wiring repairs or ECM replacement may increase the cost.
8. Can a faulty spark plug cause the P0352 code on a 2015 Toyota RAV4?
While not the primary cause, a faulty spark plug or plug wire can sometimes contribute to ignition coil circuit issues and should be checked during diagnosis.
9. Will clearing the P0352 code fix the problem on my 2015 Toyota RAV4?
Clearing the code will turn off the Check Engine Light temporarily, but the underlying issue must be addressed to prevent the code from returning.
10. How can I prevent the P0352 code on my 2015 Toyota RAV4?
Regular maintenance, such as inspecting and replacing ignition components and ensuring all wiring connections are secure, can help prevent this issue.
Discuss the causes and fixes for P0352 2015 Toyota RAV4 OBDII Code
Code P0352 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
