P0352 2011 Toyota Camry Code - Ignition Coil 2 Primary/Secondary Circuit
Quick Answer
The DIS is a 1-cylinder ignition system in which each cylinder is ignited by one ignition coil and one spark plug is connected to the end of each secondary wiring. Common causes include Faulty Ignition Coil 2, Ignition Coil 2 harness is open or shorted, Ignition Coil 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0352 2011 Toyota Camry indicates Ignition Coil 2 Primary/Secondary Circuit.
- Common causes
- Common causes include Faulty Ignition Coil 2, Ignition Coil 2 harness is open or shorted, Ignition Coil 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0352 2011 Toyota Camry Description
The ECM determines the ignition timing and transmits the ignition (IGT) signals to each cylinder. Using the IGT signal, the ECM turns the power transistor inside the igniter on and off. The power transistor, in turn, switches on and off the current to the primary coil. When the current to the primary coil is cut off, a powerful voltage is generated in the secondary coil. This voltage is applied to the spark plugs, causing them to spark inside the cylinders. As the ECM cuts the current to the primary coil, the igniter sends back an ignition confirmation (IGF) signal to the ECM, for each cylinder ignition.
What are the Possible Causes of the DTC P0352 2011 Toyota Camry?
- Faulty Ignition Coil 2
- Ignition Coil 2 harness is open or shorted
- Ignition Coil 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0352 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0352 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0352 2011 Toyota Camry code?
Need more information on how to fix the P0352 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0352 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0352 2011 Toyota Camry Code
1. What does OBDII code P0352 on a 2011 Toyota Camry indicate?
- OBDII code P0352 specifically points to an issue in the ignition coil 2 primary/secondary circuit of the vehicle.
2. What are the common symptoms of a P0352 error code in a 2011 Toyota Camry?
- Common symptoms include engine misfires, rough idling, loss of power, and in some cases, the Check Engine light may illuminate.
3. What are the potential causes of the P0352 code in a 2011 Toyota Camry?
- The code may be triggered by a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or a problem with the Engine Control Module (ECM).
4. How can I diagnose the issue causing the P0352 code in my 2011 Toyota Camry?
- Diagnosing the problem typically involves checking the ignition coil 2 for damage, inspecting the wiring and connectors for any signs of wear or corrosion, and testing the ECM for proper function.
5. Can I still drive my 2011 Toyota Camry with a P0352 error code?
- It is not recommended to drive the vehicle with a P0352 code as it can lead to further damage to the engine and catalytic converter. It's best to address the issue promptly.
6. How can I repair the ignition coil 2 primary/secondary circuit issue in my 2011 Toyota Camry?
- Repairing the issue may involve replacing the faulty ignition coil, repairing or replacing damaged wiring or connectors, or reprogramming the ECM if necessary.
7. Is it possible to reset the P0352 code in a 2011 Toyota Camry without fixing the underlying issue?
- While you can clear the error code with an OBDII scanner, the Check Engine light will likely reappear if the root cause of the problem is not addressed.
8. Are there any maintenance tips to prevent the recurrence of the P0352 error code in my 2011 Toyota Camry?
- Regularly inspecting and maintaining the ignition system, including the ignition coils and associated wiring, can help prevent issues that may trigger the P0352 code.
9. How much does it typically cost to repair a P0352 error code in a 2011 Toyota Camry?
- The cost of repair can vary depending on the cause of the issue, but it may involve parts and labor ranging from $100 to $300 or more, depending on the extent of the problem.
10. Can a DIY enthusiast with some mechanical skills fix the P0352 code in a 2011 Toyota Camry?
- While some DIY enthusiasts may be able to replace the ignition coil or check the wiring, diagnosing and repairing the root cause of the P0352 code may require professional expertise and equipment.
Discuss the causes and fixes for P0352 2011 Toyota Camry OBDII Code
Code P0352 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
