AutoCodes – Honda – P0352 2010 Honda Accord

P0352 2010 Honda Accord Code - Ignition Coil 2 Circuit Malfunction

Quick Answer

The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 2, Ignition Coil 2 harness is open or shorted, Ignition Coil 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0352 2010 Honda Accord indicates Ignition Coil 2 Circuit Malfunction.
Common causes: Common causes include Faulty Ignition Coil 2, Ignition Coil 2 harness is open or shorted, Ignition Coil 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,341

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0352 2010 Honda Accord Description

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.

OBDII Code P0352 2010 Honda Accord - Ignition Coil 2 Circuit Malfunction - AutoCodes.com — P0352 2010 Honda Accord Code - Ignition Coil 2 Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P0352 2010 Honda Accord?

Faulty Ignition Coil 2
Ignition Coil 2 harness is open or shorted
Ignition Coil 2 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0352 2010 Honda Accord?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0352 2010 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0352 2010 Honda Accord code?

Need more information on how to fix the P0352 2010 Honda Accord code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0352 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0352 2010 Honda Accord Code

1. What does the OBDII code P0352 on a 2010 Honda Accord indicate?

The code P0352 signifies an Ignition Coil 2 Circuit Malfunction in the vehicle's engine.

2. What are common symptoms of a P0352 error in a 2010 Honda Accord?

Common symptoms include engine misfires, rough idling, lack of power, and in some cases, the engine may even stall.

3. What are the possible causes of a P0352 error in a 2010 Honda Accord?

Potential causes include a faulty ignition coil, wiring issues in the ignition coil circuit, a poor electrical connection, or a problem with the Engine Control Module (ECM).

4. How can I diagnose the source of a P0352 code in my 2010 Honda Accord?

You can start by checking the ignition coil for any visible damage, inspecting the wiring for signs of wear or corrosion, and using a multimeter to test the continuity of the circuit.

5. Can I drive my 2010 Honda Accord with a P0352 error code?

It is not recommended to drive the vehicle with a P0352 code as it can lead to further damage to the engine and affect the overall performance of the car.

6. How can I repair a P0352 error in my 2010 Honda Accord?

To fix a P0352 code, you may need to replace the faulty ignition coil, repair any damaged wiring, and clear the error codes using an OBDII scanner.

7. Is it easy to replace the ignition coil in a 2010 Honda Accord to fix a P0352 code?

Replacing the ignition coil in a 2010 Honda Accord is a relatively straightforward process that can be done with basic tools, but it's recommended to follow the manufacturer's guidelines or seek professional help.

8. Will resetting the OBDII codes clear a P0352 error in my 2010 Honda Accord?

Resetting the codes may temporarily clear the error, but if the underlying issue causing the P0352 code is not addressed, the code is likely to reappear.

9. How much does it typically cost to fix a P0352 error in a 2010 Honda Accord?

The cost of fixing a P0352 error can vary depending on the root cause, but it may range from $100 to $300 for parts and labor.

10. Can a P0352 error in a 2010 Honda Accord cause long-term damage if left unrepaired?

Continued driving with a P0352 error can potentially lead to more severe engine problems and decrease the overall reliability and performance of the vehicle over time.