P0352 2006 Ford Fusion Code - Ignition Coil 'B' Primary/Secondary Circuit
Quick Answer
The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 2, Ignition Coil 2 harness is open or shorted, Ignition Coil 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0352 2006 Ford Fusion indicates Ignition Coil 'B' Primary/Secondary Circuit .
- Common causes
- Common causes include Faulty Ignition Coil 2, Ignition Coil 2 harness is open or shorted, Ignition Coil 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0352 2006 Ford Fusion Description
What are the Possible Causes of the DTC P0352 2006 Ford Fusion?
- Faulty Ignition Coil 2
- Ignition Coil 2 harness is open or shorted
- Ignition Coil 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0352 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0352 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0352 2006 Ford Fusion code?
Need more information on how to fix the P0352 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0352 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0352 2006 Ford Fusion Code
1. What does OBDII code P0352 on a 2006 Ford Fusion mean?
This code indicates a problem with the ignition coil 'B' primary/secondary circuit.
2. What are common symptoms of OBDII code P0352 on a 2006 Ford Fusion?
Common symptoms include engine misfires, rough idling, loss of power, and difficulty starting the vehicle.
3. What are possible causes of OBDII code P0352 on a 2006 Ford Fusion?
Possible causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or issues with the PCM (powertrain control module).
4. How can I diagnose the issue causing OBDII code P0352 on a 2006 Ford Fusion?
You can use a scan tool to check for other related trouble codes, visually inspect the ignition coil and its wiring, and perform a resistance test on the ignition coil.
5. Can I still drive my 2006 Ford Fusion with OBDII code P0352?
It is not recommended to drive the vehicle with this code as it can lead to further damage and potential safety issues. It's best to address the issue promptly.
6. How can I repair OBDII code P0352 on a 2006 Ford Fusion?
Repair options include replacing the faulty ignition coil, repairing any damaged wiring or connectors, and resetting the trouble code with a scan tool after the repair.
7. Can a DIY enthusiast fix OBDII code P0352 on a 2006 Ford Fusion?
Depending on your skill level and access to tools, you may be able to replace the ignition coil yourself. However, diagnosing and repairing wiring issues or PCM problems may require professional assistance.
8. How much does it cost to repair OBDII code P0352 on a 2006 Ford Fusion?
The cost can vary depending on the root cause of the issue, but replacing an ignition coil can range from $100 to $300, including parts and labor.
9. Will OBDII code P0352 on a 2006 Ford Fusion affect fuel efficiency?
Yes, unresolved ignition coil issues can lead to decreased fuel efficiency due to engine misfires and improper combustion.
10. How often does OBDII code P0352 occur in a 2006 Ford Fusion?
The occurrence of this code can vary, but it is a relatively common issue in vehicles with ignition system problems, especially as they age.
Discuss the causes and fixes for P0352 2006 Ford Fusion OBDII Code
Code P0352 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
