AutoCodes – GMC – P0351 2014 GMC Sierra

P0351 2014 GMC Sierra Code - Ignition Coil 1 Control Circuit

Quick Answer

The ignition system on this engine uses ignition coils with integrated power transistors. Common causes include Faulty Ignition Coil 1, Ignition Coil 1 harness is open or shorted, Ignition Coil 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0351 2014 GMC Sierra indicates Ignition Coil 1 Control Circuit.
Common causes
Common causes include Faulty Ignition Coil 1, Ignition Coil 1 harness is open or shorted, Ignition Coil 1 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 297
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 25, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0351 2014 GMC Sierra Description

The ignition system on this engine uses ignition coils with integrated power transistors. The Engine Control Module (ECM) controls the spark event for each cylinder through individual ignition coil control circuits. When the ECM commands the ignition control circuit On, electrical current flows through the primary winding of the ignition coil, creating a magnetic field. When a spark event is requested, the ECM commands the ignition control circuit Off, interrupting current flow through the primary winding. The collapsing magnetic field created by the primary winding induces a high voltage in the secondary winding, which is connected to the spark plugs. The Diagnostic Trouble Code (DTC) will be set when the control circuit commanded by the ECM state does not match the actual state.
OBDII Code P0351 2014 GMC Sierra - Ignition Coil 1 Control Circuit - AutoCodes.com
P0351 2014 GMC Sierra Code - Ignition Coil 1 Control Circuit

What are the Possible Causes of the DTC P0351 2014 GMC Sierra?

  • Faulty Ignition Coil 1
  • Ignition Coil 1 harness is open or shorted
  • Ignition Coil 1 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0351 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0351 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0351 2014 GMC Sierra code?

Need more information on how to fix the P0351 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0351 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0351 2014 GMC Sierra Code

What does the OBDII code P0351 mean on a 2014 GMC Sierra?

P0351 indicates an issue with the ignition coil 1 control circuit, meaning the engine control module (ECM) has detected a fault in the electrical circuit for the ignition coil on cylinder 1.

What are the symptoms of code P0351 in a 2014 GMC Sierra?

Symptoms may include engine misfires, rough idling, reduced power, poor fuel economy, and an illuminated check engine light.

What causes the P0351 code to appear in a 2014 GMC Sierra?

Common causes include a faulty ignition coil, damaged or corroded wiring, a malfunctioning ECM, or a bad spark plug.

Can I drive my 2014 GMC Sierra with the P0351 code?

Driving with this code is not recommended, as it can cause further damage to the engine or catalytic converter due to unburnt fuel from misfires.

How do I diagnose the P0351 code on my GMC Sierra?

Inspect the ignition coil and wiring for damage or corrosion, test the ignition coil with a multimeter, and check the spark plug for wear or fouling.

How do I fix the P0351 code in a 2014 GMC Sierra?

Repairs may include replacing the faulty ignition coil, repairing or replacing damaged wiring, replacing a bad spark plug, or in rare cases, replacing the ECM.

What tools are needed to troubleshoot the P0351 code?

You'll need an OBDII scanner, a multimeter, and basic hand tools to inspect wiring and replace components.

How much does it cost to fix the P0351 code on a 2014 GMC Sierra?

Repair costs can vary, typically ranging from $50 to $200 for parts like an ignition coil or spark plug, plus labor if a mechanic is involved.

Can a bad spark plug cause the P0351 code?

Yes, a worn or fouled spark plug can cause ignition coil issues, triggering the P0351 code.

What happens if I ignore the P0351 code on my GMC Sierra?

Ignoring this code can lead to ongoing misfires, reduced engine performance, and potential damage to the catalytic converter.

Discuss the causes and fixes for P0351 2014 GMC Sierra OBDII Code

Code P0351 2014 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play