AutoCodes – Toyota – P0351 2008 Toyota Prius

P0351 2008 Toyota Prius Code - Ignition Coil 1 Primary/Secondary Circuit

Quick Answer

The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 1, Ignition Coil 1 harness is open or shorted, Ignition Coil 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0351 2008 Toyota Prius indicates Ignition Coil 1 Primary/Secondary Circuit.
Common causes
Common causes include Faulty Ignition Coil 1, Ignition Coil 1 harness is open or shorted, Ignition Coil 1 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,629
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0351 2008 Toyota Prius Description

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
OBDII Code P0351 2008 Toyota Prius - Ignition Coil 1 Primary/Secondary Circuit - AutoCodes.com
P0351 2008 Toyota Prius Code - Ignition Coil 1 Primary/Secondary Circuit

What are the Possible Causes of the DTC P0351 2008 Toyota Prius?

  • Faulty Ignition Coil 1
  • Ignition Coil 1 harness is open or shorted
  • Ignition Coil 1 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0351 2008 Toyota Prius?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0351 2008 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0351 2008 Toyota Prius code?

Need more information on how to fix the P0351 2008 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0351 2008 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0351 2008 Toyota Prius Code

1. What does the OBDII code P0351 mean on a 2008 Toyota Prius?

P0351 indicates an issue with the Ignition Coil 1 Primary/Secondary Circuit, meaning the Engine Control Module (ECM) has detected a malfunction in the circuit for ignition coil 1.

2. What are the symptoms of code P0351 in a 2008 Toyota Prius?

Common symptoms include engine misfires, rough idling, reduced fuel efficiency, difficulty starting the engine, and the Check Engine Light turning on.

3. What causes the P0351 code in a 2008 Toyota Prius?

Possible causes include a faulty ignition coil, damaged wiring or connectors, a bad ECM, or issues with the spark plug connected to ignition coil 1.

4. Can a bad spark plug cause the P0351 code on a Prius?

Yes, a worn or faulty spark plug connected to ignition coil 1 can cause the P0351 code by disrupting the circuit's functionality.

5. How do you diagnose the P0351 code on a 2008 Toyota Prius?

Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting ignition coil 1, checking the wiring and connectors for damage, and testing the ignition coil with a multimeter.

6. Is it safe to drive with a P0351 code on a 2008 Toyota Prius?

Driving is possible but not recommended, as the issue can lead to poor performance, increased fuel consumption, and potential engine damage if left unresolved.

7. How do you fix the P0351 code on a 2008 Toyota Prius?

Repairs may involve replacing the faulty ignition coil, repairing damaged wiring or connectors, replacing the spark plug, or in rare cases, replacing or reprogramming the ECM.

8. How much does it cost to repair the P0351 code on a Prius?

The cost varies depending on the issue. Replacing an ignition coil typically costs $100-$200 for parts and labor, while more extensive repairs (like ECM replacement) may cost significantly more.

9. Can a weak battery cause the P0351 code on a 2008 Toyota Prius?

While unlikely, a weak or failing battery can cause electrical issues that might indirectly lead to ignition coil problems. It's worth checking the battery if other components seem functional.

10. Do I need to replace all ignition coils if one fails on a 2008 Toyota Prius?

It's not necessary to replace all coils, but if the vehicle has high mileage, replacing all coils proactively can prevent future issues and ensure consistent performance.

Discuss the causes and fixes for P0351 2008 Toyota Prius OBDII Code

Code P0351 2008 Toyota Prius comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play