P034A 2017 GMC Sierra Code - Crankshaft Position Sensor Engine Start Position Incorrect
Quick Answer
The Engine Control Module (ECM) monitors the speed and the direction of rotation of the crankshaft during an autostop event and memorizes the crankshaft angle at which the engine stopped to be able to start the engine quicker. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P034A 2017 GMC Sierra indicates Crankshaft Position Sensor Engine Start Position Incorrect.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P034A 2017 GMC Sierra Description
What are the Possible Causes of the DTC P034A 2017 GMC Sierra?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P034A 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P034A 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P034A 2017 GMC Sierra code?
Need more information on how to fix the P034A 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P034A 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P034A 2017 GMC Sierra Code
1. What are common symptoms of OBDII code P034A in a 2017 GMC Sierra?
The common symptoms of code P034A include difficulty starting the engine, engine misfires, rough idling, and decreased fuel efficiency.
2. What can cause the OBDII code P034A in a 2017 GMC Sierra?
The OBDII code P034A in a 2017 GMC Sierra is often triggered by a faulty crankshaft position sensor or issues related to the engine start position sensor.
3. How can I diagnose the OBDII code P034A in my 2017 GMC Sierra?
Diagnosing code P034A involves using an OBDII scanner to retrieve the fault code, checking the crankshaft position sensor for proper operation, and inspecting the engine start position sensor for any issues.
4. Can a faulty crankshaft position sensor cause code P034A in a 2017 GMC Sierra?
Yes, a faulty crankshaft position sensor can cause code P034A in a 2017 GMC Sierra because it affects the engine's ability to start correctly and maintain proper timing.
5. What are some repair tips for addressing OBDII code P034A in a 2017 GMC Sierra?
Repair tips for code P034A may include replacing the crankshaft position sensor, checking and repairing any wiring or connection issues, and clearing the fault code with an OBDII scanner.
6. Is it safe to continue driving my 2017 GMC Sierra with OBDII code P034A?
It is not recommended to continue driving your 2017 GMC Sierra with code P034A, as it can lead to further engine performance issues and potential breakdowns.
7. Can a DIY enthusiast repair OBDII code P034A in a 2017 GMC Sierra?
While some DIY enthusiasts may be able to address code P034A by replacing the crankshaft position sensor, it is recommended to consult a professional mechanic for accurate diagnosis and repair.
8. How much does it typically cost to repair OBDII code P034A in a 2017 GMC Sierra?
The cost of repairing code P034A in a 2017 GMC Sierra can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Will resetting the check engine light resolve OBDII code P034A in a 2017 GMC Sierra?
Simply resetting the check engine light without addressing the underlying issue causing code P034A will not fix the problem. It is important to diagnose and repair the root cause of the fault code.
10. Can extreme weather conditions trigger OBDII code P034A in a 2017 GMC Sierra?
Extreme weather conditions can potentially affect the performance of sensors and components related to code P034A in a 2017 GMC Sierra, but the issue is more likely due to a faulty sensor or wiring problem.
Discuss the causes and fixes for P034A 2017 GMC Sierra OBDII Code
Code P034A 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
