P0348 2007 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit High Input Bank 2
Quick Answer
The Camshaft Position (CMP) sensor consists of a magnet and an iron core which is wrapped with copper wire, and is installed onto the cylinder head. Common causes include Faulty Camshaft Position Sensor, VVT Sensor for Intake Camshaft (For V6 engine), Camshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0348 2007 Toyota Camry indicates Camshaft Position Sensor 'A' Circuit High Input Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, VVT Sensor for Intake Camshaft (For V6 engine), Camshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0348 2007 Toyota Camry Description
What are the Possible Causes of the DTC P0348 2007 Toyota Camry?
- Faulty Camshaft Position Sensor
- VVT Sensor for Intake Camshaft (For V6 engine)
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
- Timing Chain Jumped Tooth
How to Fix the DTC P0348 2007 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0348 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0348 2007 Toyota Camry code?
Need more information on how to fix the P0348 2007 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0348 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0348 2007 Toyota Camry Code
1. What does the OBDII code P0348 mean on a 2007 Toyota Camry?
P0348 indicates a "Camshaft Position Sensor 'A' Circuit High Input" on Bank 2, meaning the sensor is sending a voltage signal that is higher than expected to the engine control module (ECM).
2. What are the symptoms of a P0348 code in a 2007 Toyota Camry?
Symptoms may include difficulty starting, rough idling, reduced engine performance, poor fuel efficiency, and the check engine light being illuminated.
3. What causes the P0348 code in a 2007 Toyota Camry?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors in the sensor’s circuit, a failed ECM, or timing chain/belt issues.
4. How can I diagnose a P0348 code on my 2007 Toyota Camry?
Start by inspecting the camshaft position sensor and its wiring for damage or loose connections. Use a multimeter to check for proper voltage and continuity in the circuit. A scan tool can also confirm live sensor data.
5. Where is the camshaft position sensor 'A' Bank 2 located in a 2007 Toyota Camry?
Bank 2 refers to the side of the engine opposite Bank 1 (typically the side with cylinder 2). Sensor 'A' is the camshaft position sensor for the intake camshaft on that bank.
6. Can I drive my 2007 Toyota Camry with a P0348 code?
Driving with a P0348 code is not recommended, as it can lead to poor engine performance and possible damage to internal components if left unresolved.
7. How do I fix the P0348 code on my 2007 Toyota Camry?
Common fixes include replacing the faulty camshaft position sensor, repairing or replacing damaged wiring or connectors, and addressing any timing issues.
8. How much does it cost to repair a P0348 code on a 2007 Toyota Camry?
Replacing the camshaft position sensor typically costs between $100 and $250, including parts and labor. Additional repair costs may vary depending on further issues, such as wiring repairs or timing adjustments.
9. Can a bad camshaft position sensor cause a P0348 code?
Yes, a malfunctioning camshaft position sensor is one of the most common causes of a P0348 code.
10. Will clearing the P0348 code fix the problem in my 2007 Toyota Camry?
Clearing the code with a scan tool may temporarily turn off the check engine light, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0348 2007 Toyota Camry OBDII Code
Code P0348 2007 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
