P0345 Volkswagen Code - Camshaft Position Sensor
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 Volkswagen indicates Camshaft Position Sensor .
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 Volkswagen Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 Volkswagen?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 Volkswagen?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 Volkswagen code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 Volkswagen code?
Need more information on how to fix the P0345 Volkswagen code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 Volkswagen code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 Volkswagen Code
1. What does the OBDII code P0345 mean on a Volkswagen?
P0345 indicates an issue with the Camshaft Position Sensor "A" Circuit in Bank 2, often involving a malfunction in the sensor's signal to the ECU.
2. What are the common symptoms of P0345 in a Volkswagen?
Symptoms include rough idling, engine misfires, reduced power, poor fuel efficiency, difficulty starting, or the engine failing to start.
3. What causes the P0345 code in Volkswagen vehicles?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors, a malfunctioning ECM, or timing chain/belt issues.
4. Can a bad camshaft position sensor trigger P0345?
Yes, a failing or defective camshaft position sensor is one of the primary causes of the P0345 code.
5. How do you diagnose the P0345 code on a Volkswagen?
Diagnosis involves checking the camshaft position sensor, inspecting wiring and connectors for damage, and verifying the timing chain or belt alignment.
6. Can I drive my Volkswagen with the P0345 code?
Driving with P0345 is not recommended, as it can lead to engine performance issues, reduced power, and potential damage if not addressed promptly.
7. How do you fix the P0345 code on a Volkswagen?
Repairs may include replacing the faulty camshaft position sensor, repairing damaged wiring or connectors, or addressing timing chain/belt problems.
8. How much does it cost to repair the P0345 code on a Volkswagen?
The cost varies but typically ranges between $150 and $300, depending on whether the issue is with the sensor, wiring, or other components.
9. Can low battery voltage cause a P0345 code?
Yes, low battery voltage or charging system issues can sometimes cause erratic signals from the camshaft position sensor, triggering the P0345 code.
10. Does P0345 always mean the camshaft position sensor is faulty?
Not always—it can also be caused by wiring issues, connector problems, or timing system malfunctions. Proper diagnosis is essential.
Discuss the causes and fixes for P0345 Volkswagen OBDII Code
Code P0345 Volkswagen comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
