P0345 Audi Code - Camshaft Position Sensor
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 Audi indicates Camshaft Position Sensor .
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 Audi Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 Audi?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 Audi code?
Need more information on how to fix the P0345 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 Audi Code
1. What are the common symptoms of OBDII code P0345 in an Audi related to the camshaft position sensor?
The common symptoms include rough idling, engine misfires, difficulty starting the engine, and a decrease in fuel efficiency.
2. What can cause the OBDII code P0345 to appear in an Audi?
The code P0345 in an Audi is typically triggered by a faulty camshaft position sensor, damaged wiring or connectors, or an issue with the timing belt or chain.
3. How can I diagnose the cause of OBDII code P0345 in my Audi related to the camshaft position sensor?
You can diagnose the issue by checking the wiring and connectors for damage, testing the camshaft position sensor using a multimeter, and inspecting the timing belt or chain for proper alignment.
4. What are the repair options for fixing OBDII code P0345 in an Audi?
The repair options include replacing the camshaft position sensor, repairing or replacing damaged wiring or connectors, and ensuring the proper alignment of the timing belt or chain.
5. Can I drive my Audi with OBDII code P0345 related to the camshaft position sensor?
It is not recommended to drive your Audi with code P0345 as it can lead to further engine damage and potential safety issues. It's best to address the issue promptly.
6. How much does it typically cost to repair OBDII code P0345 in an Audi?
The cost of repairing code P0345 in an Audi can vary depending on the root cause of the issue, but it usually ranges from $150 to $400 for parts and labor.
7. Are there any preventive measures to avoid OBDII code P0345 in an Audi?
Regular maintenance, including checking and replacing the camshaft position sensor at recommended intervals, can help prevent the occurrence of code P0345 in an Audi.
8. Can a DIY enthusiast replace the camshaft position sensor to fix OBDII code P0345 in an Audi?
Replacing the camshaft position sensor can be a relatively straightforward DIY task for those with some automotive repair experience, as long as they follow the manufacturer's guidelines.
9. Will resetting the OBDII code P0345 in an Audi make it go away permanently?
Resetting the code may temporarily clear the error, but if the underlying issue with the camshaft position sensor or related components is not fixed, the code is likely to reappear.
10. How long does it take to repair OBDII code P0345 related to the camshaft position sensor in an Audi?
The repair time can vary depending on the exact cause of the issue, but typically, it takes around 1-2 hours for a professional mechanic to diagnose and fix code P0345 in an Audi.
Discuss the causes and fixes for P0345 Audi OBDII Code
-
Q7 premium plus, cold start up normal but stalls out after 4-6 seconds then hard or no start unless accelerator pedal is pressed, p0345, p0300, p0304, p0306, u0100 ?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
