P0345 2012 Nissan Altima Sedan Code - Camshaft Position Sensor Circuit Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2012 Nissan Altima Sedan indicates Camshaft Position Sensor Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2012 Nissan Altima Sedan Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 2012 Nissan Altima Sedan?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 2012 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2012 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2012 Nissan Altima Sedan code?
Need more information on how to fix the P0345 2012 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2012 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2012 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0345 in a 2012 Nissan Altima Sedan?
The common symptoms of code P0345 include rough idling, stalling, poor acceleration, and in some cases, the engine may not start.
2. What does OBDII code P0345 indicate in a 2012 Nissan Altima Sedan?
Code P0345 indicates a problem with the camshaft position sensor circuit in Bank 2 of the engine.
3. What are the possible causes of OBDII code P0345 in a 2012 Nissan Altima Sedan?
Possible causes of code P0345 include a faulty camshaft position sensor, wiring issues, sensor connector problems, or issues with the engine control module (ECM).
4. How can I diagnose the cause of OBDII code P0345 in my 2012 Nissan Altima Sedan?
Diagnosing code P0345 involves checking the camshaft position sensor, inspecting the wiring and connections, testing the sensor's voltage, and scanning for any related trouble codes.
5. Can I continue driving my 2012 Nissan Altima Sedan with OBDII code P0345?
It is not recommended to continue driving your vehicle with code P0345 as it can lead to more severe engine problems and potential breakdowns.
6. How can I repair OBDII code P0345 in my 2012 Nissan Altima Sedan?
To repair code P0345, you may need to replace the camshaft position sensor, repair any wiring issues, or address any problems with the sensor connector or ECM.
7. Is it possible to reset OBDII code P0345 in a 2012 Nissan Altima Sedan without fixing the issue?
Resetting the code without fixing the underlying issue is not recommended, as the problem will likely reoccur, and it can lead to more significant engine problems over time.
8. Can a DIY enthusiast fix OBDII code P0345 in a 2012 Nissan Altima Sedan?
Depending on your skills and experience, some DIY enthusiasts may be able to address code P0345 by replacing the camshaft position sensor or checking for wiring issues. However, more complex problems may require professional help.
9. How much does it cost to repair OBDII code P0345 in a 2012 Nissan Altima Sedan?
The cost of repairing code P0345 can vary depending on the cause of the issue, the labor rates in your area, and whether you choose to fix it yourself or take it to a mechanic. Costs may range from $100 to $300 or more.
10. How long does it take to repair OBDII code P0345 in a 2012 Nissan Altima Sedan?
The repair time for code P0345 can vary based on the cause of the problem and your expertise. Replacing the camshaft position sensor typically takes around 1-2 hours, while diagnosing and fixing wiring issues or ECM problems may take longer.
Discuss the causes and fixes for P0345 2012 Nissan Altima Sedan OBDII Code
Code P0345 2012 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
