P0345 2011 Nissan Altima Sedan Code - Camshaft Position Sensor Circuit Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2011 Nissan Altima Sedan indicates Camshaft Position Sensor Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2011 Nissan Altima Sedan Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 2011 Nissan Altima Sedan?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 2011 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2011 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2011 Nissan Altima Sedan code?
Need more information on how to fix the P0345 2011 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2011 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2011 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0345 in a 2011 Nissan Altima Sedan?
The common symptoms of code P0345 (Camshaft Position Sensor Circuit Bank 2) in a 2011 Nissan Altima Sedan include engine misfires, rough idling, and difficulty starting the vehicle.
2. What could be the possible causes of OBDII code P0345 in a 2011 Nissan Altima Sedan?
The possible causes of code P0345 in a 2011 Nissan Altima Sedan include a faulty camshaft position sensor, wiring issues in the camshaft position sensor circuit, or a problem with the engine control module (ECM).
3. How can I diagnose the OBDII code P0345 in my 2011 Nissan Altima Sedan?
To diagnose code P0345 in a 2011 Nissan Altima Sedan, you can use an OBDII scanner to retrieve the trouble code, visually inspect the camshaft position sensor and its wiring, and perform a continuity test on the sensor circuit.
4. Can I continue driving my 2011 Nissan Altima Sedan with OBDII code P0345 active?
It is not recommended to continue driving your 2011 Nissan Altima Sedan with OBDII code P0345 active, as it can lead to potential engine performance issues and further damage if left unresolved.
5. How do I repair OBDII code P0345 in my 2011 Nissan Altima Sedan?
To repair code P0345 in a 2011 Nissan Altima Sedan, you may need to replace the camshaft position sensor, repair any damaged wiring in the sensor circuit, or reprogram the engine control module (ECM) if necessary.
6. Can a DIY enthusiast fix OBDII code P0345 in a 2011 Nissan Altima Sedan?
A DIY enthusiast with the necessary tools and knowledge may be able to fix OBDII code P0345 in a 2011 Nissan Altima Sedan by following the repair procedures outlined in the vehicle's service manual.
7. How much does it cost to repair OBDII code P0345 in a 2011 Nissan Altima Sedan?
The cost to repair OBDII code P0345 in a 2011 Nissan Altima Sedan can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.
8. Will resetting the OBDII code P0345 in my 2011 Nissan Altima Sedan make it go away permanently?
Resetting the OBDII code P0345 in a 2011 Nissan Altima Sedan may temporarily clear the code, but if the underlying issue causing the code is not addressed, it is likely to return.
Discuss the causes and fixes for P0345 2011 Nissan Altima Sedan OBDII Code
Code P0345 2011 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
