P0345 2011 Ford Fusion Code - Camshaft Position Sensor 'A' Circuit Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2011 Ford Fusion indicates Camshaft Position Sensor 'A' Circuit Bank 2 .
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2011 Ford Fusion Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 2011 Ford Fusion?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Variable Cam Timing (VTC) Solenoid
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2011 Ford Fusion code?
Need more information on how to fix the P0345 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2011 Ford Fusion Code
1. What does OBDII code P0345 mean for a 2011 Ford Fusion?
- This code indicates a problem with the Camshaft Position Sensor 'A' Circuit Bank 2 in the vehicle.
2. What are the common symptoms of OBDII code P0345 in a 2011 Ford Fusion?
- Common symptoms include engine misfires, rough idling, stalling, and a decrease in fuel efficiency.
3. What are the possible causes of OBDII code P0345 in a 2011 Ford Fusion?
- The code can be triggered by a faulty camshaft position sensor, wiring issues, sensor connection problems, or a damaged sensor.
4. How can I diagnose the cause of OBDII code P0345 in my 2011 Ford Fusion?
- To diagnose the issue, you can perform a visual inspection of the sensor and its wiring, test the sensor's voltage and resistance, and check for any loose connections.
5. Can I drive my 2011 Ford Fusion with OBDII code P0345?
- It is not recommended to drive the vehicle with this code as it can lead to more severe engine problems and potential breakdowns.
6. How do I repair OBDII code P0345 in my 2011 Ford Fusion?
- The repair typically involves replacing the camshaft position sensor, fixing any wiring issues, and ensuring proper sensor connection.
7. Are there any tips to prevent OBDII code P0345 in a 2011 Ford Fusion?
- Regular maintenance, such as checking and replacing sensors as recommended, can help prevent this code from appearing.
8. Can a DIYer fix OBDII code P0345 in a 2011 Ford Fusion?
- Depending on your experience and tools, you may be able to replace the camshaft position sensor yourself. However, it's recommended to consult a professional for accurate diagnosis and repair.
9. How much does it cost to fix OBDII code P0345 in a 2011 Ford Fusion?
- The cost can vary depending on the cause of the issue, but typically, replacing the camshaft position sensor can range from $100 to $300, including parts and labor.
10. Will resetting the OBDII code P0345 in a 2011 Ford Fusion make it go away permanently?
- Resetting the code may temporarily turn off the check engine light, but if the underlying issue is not fixed, the code is likely to reappear.
Discuss the causes and fixes for P0345 2011 Ford Fusion OBDII Code
Code P0345 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
