P0345 2010 Nissan Pathfinder Code - Camshaft Position Sensor Circuit Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2010 Nissan Pathfinder indicates Camshaft Position Sensor Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2010 Nissan Pathfinder Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 2010 Nissan Pathfinder?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 2010 Nissan Pathfinder?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2010 Nissan Pathfinder code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2010 Nissan Pathfinder code?
Need more information on how to fix the P0345 2010 Nissan Pathfinder code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2010 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2010 Nissan Pathfinder Code
1. What does the OBDII code P0345 mean on a 2010 Nissan Pathfinder?
P0345 indicates an issue with the camshaft position sensor circuit on Bank 2, meaning the sensor is not providing the expected signal to the engine control module (ECM).
2. What are the common symptoms of the P0345 code in a 2010 Nissan Pathfinder?
Symptoms may include difficulty starting, rough idling, reduced engine performance, misfires, stalling, or the check engine light being illuminated.
3. What causes the P0345 code on a 2010 Nissan Pathfinder?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors, a failed crankshaft position sensor, timing chain issues, or a malfunctioning ECM.
4. Can a faulty camshaft position sensor trigger the P0345 code on a 2010 Nissan Pathfinder?
Yes, a faulty camshaft position sensor is one of the most common causes of the P0345 code.
5. Is it safe to drive with the P0345 code on a 2010 Nissan Pathfinder?
It is not recommended to drive with this code active, as it may lead to stalling, poor engine performance, or further damage to engine components.
6. How can I diagnose the P0345 code on a 2010 Nissan Pathfinder?
Diagnosis involves checking the camshaft position sensor, inspecting the wiring and connectors, verifying proper timing chain alignment, and testing related components such as the crankshaft position sensor.
7. How do you fix the P0345 code on a 2010 Nissan Pathfinder?
Repairs may include replacing the camshaft position sensor, repairing or replacing damaged wiring, addressing timing chain issues, or reprogramming or replacing the ECM if necessary.
8. What tools are needed to diagnose the P0345 code on a 2010 Nissan Pathfinder?
You will need an OBDII scanner, a multimeter for testing electrical connections, and possibly specialized tools for inspecting or replacing the camshaft position sensor.
9. Can the P0345 code on a 2010 Nissan Pathfinder be caused by a bad timing chain?
Yes, a stretched or improperly aligned timing chain can affect the camshaft position sensor signal and trigger the P0345 code.
10. How much does it typically cost to fix the P0345 code on a 2010 Nissan Pathfinder?
The cost depends on the issue, ranging from $100 to $300 for a camshaft position sensor replacement, and significantly more if timing chain repairs are required.
Discuss the causes and fixes for P0345 2010 Nissan Pathfinder OBDII Code
Code P0345 2010 Nissan Pathfinder comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.