P0345 2008 Nissan Pathfinder Code - Camshaft Position Sensor Circuit Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2008 Nissan Pathfinder indicates Camshaft Position Sensor Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2008 Nissan Pathfinder Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 2008 Nissan Pathfinder?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 2008 Nissan Pathfinder?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2008 Nissan Pathfinder code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2008 Nissan Pathfinder code?
Need more information on how to fix the P0345 2008 Nissan Pathfinder code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2008 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2008 Nissan Pathfinder Code
1. What does the OBDII code P0345 mean on a 2008 Nissan Pathfinder?
P0345 indicates a malfunction in the camshaft position sensor circuit for bank 2, which means the engine control module (ECM) is not receiving proper signals from the sensor to monitor camshaft timing.
2. What are the common symptoms of a P0345 code in a 2008 Nissan Pathfinder?
Symptoms may include difficulty starting, rough idling, decreased fuel efficiency, engine stalling, reduced power, and the check engine light illuminating.
3. What causes the P0345 code to appear in a 2008 Nissan Pathfinder?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors in the sensor circuit, a failed ECM, or issues with the timing chain or camshaft itself.
4. Can I drive my 2008 Nissan Pathfinder with a P0345 code?
Driving with a P0345 code is not recommended as it can lead to poor engine performance, stalling, or further engine damage if the issue is not addressed promptly.
5. How do I diagnose the P0345 code on my 2008 Nissan Pathfinder?
Diagnosis typically involves checking the camshaft position sensor, inspecting the wiring and connectors for damage, testing the sensor’s voltage, and verifying proper timing chain alignment.
6. How do I fix the P0345 code on a 2008 Nissan Pathfinder?
Repairs may include replacing the camshaft position sensor, repairing or replacing damaged wiring or connectors, resetting the ECM, or addressing timing chain issues if necessary.
7. Where is the camshaft position sensor for bank 2 located on a 2008 Nissan Pathfinder?
The camshaft position sensor for bank 2 is located on the side of the engine corresponding to the second cylinder bank, typically near the intake or exhaust camshaft.
8. How much does it cost to fix a P0345 code on a 2008 Nissan Pathfinder?
Repair costs can vary, but replacing a camshaft position sensor typically costs between $100 and $300, including parts and labor. Additional repairs for wiring or timing chain issues may increase costs.
9. Can I clear a P0345 code without fixing the issue on a 2008 Nissan Pathfinder?
While you can clear the code temporarily with an OBDII scanner, the issue will likely return if the underlying problem is not resolved.
10. What tools are needed to troubleshoot a P0345 code on a 2008 Nissan Pathfinder?
Common tools include an OBDII scanner, a multimeter to test voltage, and basic hand tools to access and inspect the camshaft position sensor and wiring.
Discuss the causes and fixes for P0345 2008 Nissan Pathfinder OBDII Code
Code P0345 2008 Nissan Pathfinder comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
