P0345 2007 Toyota Camry Code - Camshaft Position Sensor 'A' Circuit Bank 2
Quick Answer
The Camshaft Position (CMP) sensor consists of a magnet and an iron core which is wrapped with copper wire, and is installed onto the cylinder head. Common causes include Faulty Camshaft Position Sensor, VVT Sensor for Intake Camshaft (For V6 engine), Camshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2007 Toyota Camry indicates Camshaft Position Sensor 'A' Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, VVT Sensor for Intake Camshaft (For V6 engine), Camshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2007 Toyota Camry Description
What are the Possible Causes of the DTC P0345 2007 Toyota Camry?
- Faulty Camshaft Position Sensor
- VVT Sensor for Intake Camshaft (For V6 engine)
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
- Timing Chain Jumped Tooth
How to Fix the DTC P0345 2007 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2007 Toyota Camry code?
Need more information on how to fix the P0345 2007 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2007 Toyota Camry Code
1. What does the OBDII code P0345 mean for a 2007 Toyota Camry?
P0345 indicates an issue with the Camshaft Position Sensor 'A' Circuit on Bank 2, which means the sensor is not providing a proper signal to the engine control module (ECM).
2. What are the symptoms of code P0345 on a 2007 Toyota Camry?
Common symptoms include engine misfires, rough idling, reduced power, difficulty starting the engine, or the engine stalling.
3. What causes the P0345 code on a 2007 Toyota Camry?
The most common causes are a faulty camshaft position sensor, damaged or corroded wiring, issues with the sensor connector, or a malfunctioning ECM.
4. How do I know which camshaft position sensor to check for P0345?
The code refers to Camshaft Position Sensor 'A' on Bank 2. Bank 2 is the side of the engine with cylinder 2, and 'A' refers to the intake camshaft.
5. Can a dirty or blocked oil passage cause the P0345 code?
Yes, insufficient oil flow to the camshaft due to dirty or blocked oil passages can affect the sensor's performance and trigger the P0345 code.
6. Is it safe to drive a 2007 Toyota Camry with the P0345 code?
Driving with this code is not recommended, as it can lead to poor engine performance, potential stalling, or further engine damage.
7. How do I fix the P0345 code on my 2007 Toyota Camry?
Start by inspecting the camshaft position sensor, its wiring, and connectors. Replace the sensor if necessary. If the issue persists, check for timing chain or ECM problems.
8. Can a faulty crankshaft position sensor trigger the P0345 code?
While unlikely, a failing crankshaft position sensor may indirectly cause issues that mimic a P0345 code. Both sensors work together for timing.
9. How much does it cost to repair a P0345 code on a 2007 Toyota Camry?
Replacing a camshaft position sensor typically costs $100-$300, including parts and labor. Additional costs may apply if wiring or timing chain issues are involved.
10. Do I need to clear the P0345 code after repairs?
Yes, you should clear the code using an OBDII scanner after completing the repairs. If the issue is resolved, the code should not return.
Discuss the causes and fixes for P0345 2007 Toyota Camry OBDII Code
Code P0345 2007 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
