P0345 2006 Nissan Altima Sedan Code - Camshaft Position Sensor Circuit Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2006 Nissan Altima Sedan indicates Camshaft Position Sensor Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2006 Nissan Altima Sedan Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 2006 Nissan Altima Sedan?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 2006 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2006 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2006 Nissan Altima Sedan code?
Need more information on how to fix the P0345 2006 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2006 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2006 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0345 in a 2006 Nissan Altima Sedan?
The common symptoms of code P0345 include engine misfires, rough idling, poor acceleration, and stalling.
2. What does OBDII code P0345 indicate in a 2006 Nissan Altima Sedan?
Code P0345 indicates a problem with the Camshaft Position Sensor Circuit Bank 2 in a 2006 Nissan Altima Sedan.
3. What are the possible causes of OBDII code P0345 in a 2006 Nissan Altima Sedan?
Possible causes of code P0345 include a faulty camshaft position sensor, wiring issues, poor electrical connections, or a problem with the engine control module.
4. How can I diagnose OBDII code P0345 in my 2006 Nissan Altima Sedan?
Diagnosing code P0345 involves using a scan tool to read the code, checking the camshaft position sensor and its wiring for damage, and testing the sensor's electrical connections.
5. Can I drive my 2006 Nissan Altima Sedan with OBDII code P0345?
It is not recommended to drive your vehicle with code P0345 as it can lead to more serious engine problems and potential breakdowns.
6. How much does it typically cost to repair OBDII code P0345 in a 2006 Nissan Altima Sedan?
The cost of repairing code P0345 can vary depending on the exact cause of the issue, but it can range from $100 to $300 for parts and labor.
7. Is it possible to reset OBDII code P0345 in a 2006 Nissan Altima Sedan?
Resetting the code may temporarily turn off the Check Engine Light, but it will not fix the underlying issue causing code P0345. It is best to diagnose and repair the problem to prevent further damage.
8. Can a DIY enthusiast repair OBDII code P0345 in a 2006 Nissan Altima Sedan?
Depending on their skill level, a DIY enthusiast may be able to replace the camshaft position sensor themselves to address code P0345. However, proper diagnosis and repair are recommended for optimal results.
9. How urgent is it to address OBDII code P0345 in a 2006 Nissan Altima Sedan?
It is important to address code P0345 promptly to prevent further engine damage and potential safety hazards while driving.
10. How long does it take to repair OBDII code P0345 in a 2006 Nissan Altima Sedan?
The repair time for code P0345 can vary based on the exact cause of the issue and the skill level of the mechanic, but it typically takes around 1-2 hours to complete the repair.
Discuss the causes and fixes for P0345 2006 Nissan Altima Sedan OBDII Code
Code P0345 2006 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
