P0345 2006 Infiniti G35 Code - Camshaft Position Sensor Circuit Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2006 Infiniti G35 indicates Camshaft Position Sensor Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2006 Infiniti G35 Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 2006 Infiniti G35?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 2006 Infiniti G35?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2006 Infiniti G35 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2006 Infiniti G35 code?
Need more information on how to fix the P0345 2006 Infiniti G35 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2006 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2006 Infiniti G35 Code
1. What are the common symptoms of OBDII code P0345 in a 2006 Infiniti G35?
Symptoms may include rough idling, engine misfires, decreased fuel efficiency, and difficulty starting the vehicle.
2. What does the OBDII code P0345 in a 2006 Infiniti G35 indicate?
P0345 indicates a malfunction in the camshaft position sensor circuit for Bank 2 in the engine.
3. What are the possible causes of OBDII code P0345 in a 2006 Infiniti G35?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors, issues with the sensor's circuit, or a malfunctioning engine control module (ECM).
4. How can I diagnose the issue causing OBDII code P0345 in my 2006 Infiniti G35?
Diagnosis typically involves testing the camshaft position sensor, inspecting its wiring and connectors for damage, and checking the ECM for any faults or malfunctions.
5. Can I still drive my 2006 Infiniti G35 with OBDII code P0345 present?
It is not recommended to drive the vehicle with P0345 as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.
6. What is the typical cost to repair OBDII code P0345 in a 2006 Infiniti G35?
The cost of repair can vary depending on the exact cause of the issue. Replacing the camshaft position sensor or repairing wiring typically ranges from $100 to $300, not including labor.
7. Are there any DIY tips for fixing OBDII code P0345 in a 2006 Infiniti G35?
If you have experience with automotive repairs, you may be able to replace the camshaft position sensor yourself. However, it's recommended to consult a professional for accurate diagnosis and repair.
8. How urgent is it to address OBDII code P0345 in a 2006 Infiniti G35?
It is important to address P0345 promptly to prevent further engine damage and potential safety issues. Ignoring the code can lead to more severe problems down the line.
9. Can a faulty camshaft position sensor cause other issues in a 2006 Infiniti G35 besides triggering code P0345?
Yes, a faulty camshaft position sensor can cause various performance issues, including stalling, poor acceleration, and erratic engine behavior beyond just triggering the specific OBDII code.
10. How long does it typically take to repair OBDII code P0345 in a 2006 Infiniti G35?
The repair process can usually be completed within a few hours if all necessary parts are readily available. However, this timeframe may vary based on the extent of the issue and the repair shop's workload.
Discuss the causes and fixes for P0345 2006 Infiniti G35 OBDII Code
Code P0345 2006 Infiniti G35 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
