P0345 2004 Infiniti G35 Code - Camshaft Position Sensor Circuit Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2004 Infiniti G35 indicates Camshaft Position Sensor Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2004 Infiniti G35 Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 2004 Infiniti G35?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 2004 Infiniti G35?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2004 Infiniti G35 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2004 Infiniti G35 code?
Need more information on how to fix the P0345 2004 Infiniti G35 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2004 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2004 Infiniti G35 Code
1. What are the common symptoms of OBDII code P0345 in a 2004 Infiniti G35?
The common symptoms include engine misfires, rough idling, poor acceleration, and in some cases, the vehicle may not start.
2. What is the main cause of OBDII code P0345 in a 2004 Infiniti G35?
The main cause of code P0345 in a 2004 Infiniti G35 is a faulty camshaft position sensor in Bank 2.
3. How can I diagnose a faulty camshaft position sensor in my 2004 Infiniti G35?
You can diagnose a faulty camshaft position sensor by performing a visual inspection, checking the sensor's electrical connections, and using a multimeter to test the sensor's resistance.
4. Can a dirty camshaft position sensor cause OBDII code P0345 in a 2004 Infiniti G35?
Yes, a dirty camshaft position sensor can cause code P0345. It is recommended to clean the sensor first before replacing it.
5. What are the steps to replace the camshaft position sensor in a 2004 Infiniti G35?
To replace the camshaft position sensor, locate the sensor, disconnect the electrical connector, remove the sensor retaining bolt, and install the new sensor in its place.
6. Are there any tips to prevent OBDII code P0345 from recurring in my 2004 Infiniti G35?
Regular maintenance, such as cleaning the sensor and ensuring proper electrical connections, can help prevent the recurrence of code P0345.
7. Can driving with OBDII code P0345 in a 2004 Infiniti G35 cause further damage?
Continuing to drive with code P0345 can potentially lead to more severe engine problems, so it is advisable to address the issue promptly.
8. What is the function of the camshaft position sensor in a 2004 Infiniti G35?
The camshaft position sensor monitors the position of the camshaft and sends this information to the engine control module to ensure proper fuel injection and ignition timing.
9. Is it possible to reset OBDII code P0345 in a 2004 Infiniti G35 without fixing the issue?
Resetting the code without fixing the underlying issue will only temporarily clear the warning light. The code will likely reappear once the problem persists.
10. How much does it typically cost to replace a camshaft position sensor in a 2004 Infiniti G35?
The cost of replacing a camshaft position sensor in a 2004 Infiniti G35 can vary depending on the brand of the sensor and the labor costs, but it generally ranges from $100 to $300.
Discuss the causes and fixes for P0345 2004 Infiniti G35 OBDII Code
-
I had a long crank and I changed my this camshaft sensor A bank 2, duralast lifetime warranty part from Autozone and my crank was fixed and went back to normal, however my light is still on with the P0345 code, machanics are telling me both A and B camshaft sensors must be changed and also the crankshaft because they work hand in hand. I need help!
2004 g35 coupe Auto
-
Not true, you don't have to replace the other camshaft or crankshaft positions sensor, there is a different code when the sensor are reading different.
There are to reasons why the code is still ON, either the sensor is bad (not enough to make the engine run rough, but enough to trigger the light) or the wire from the sensor to the ECM is bad (That includes the pins inside the connector).
I recommend starting by checking sensor connector, make sure is fully connected. If the problem persist and if it's possible, either get a another sensor from AutoZone or get a factory one from the dealer.
-
Thank you very much...I went back to Autozone and they recommended me to do a Ecu reset by disconnecting the positive battery connector for 10-15 seconds and reconnecting it, then start the car and drive around for a mile or 2 to see if the engine light come back on. I did that and drove to work which is around 7 miles and so far it's still off. If it comes back on I will try your troubleshoot. Thanks a million
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
