P0345 2002 Nissan Altima Sedan Code - Camshaft Position Sensor Circuit Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0345 2002 Nissan Altima Sedan indicates Camshaft Position Sensor Circuit Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0345 2002 Nissan Altima Sedan Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0345 2002 Nissan Altima Sedan?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0345 2002 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0345 2002 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0345 2002 Nissan Altima Sedan code?
Need more information on how to fix the P0345 2002 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0345 2002 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0345 2002 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0345 on a 2002 Nissan Altima Sedan?
- Common symptoms include engine misfires, rough idling, stalling, poor acceleration, and difficulty starting the vehicle.
2. What causes the OBDII code P0345 to trigger on a 2002 Nissan Altima Sedan?
- The most common cause is a faulty camshaft position sensor or issues with the sensor's wiring or connectors.
3. How can I diagnose the source of OBDII code P0345 on my 2002 Nissan Altima Sedan?
- Use a diagnostic scanner to read the code and check the camshaft position sensor and its related wiring for any visible damage or loose connections.
4. Can a malfunctioning camshaft position sensor be repaired, or does it need to be replaced?
- In most cases, a malfunctioning camshaft position sensor will need to be replaced with a new one to resolve the issue.
5. Are there any tips for preventing OBDII code P0345 from reoccurring on a 2002 Nissan Altima Sedan?
- Regularly inspect and maintain the camshaft position sensor and its wiring to ensure they are in good working condition.
6. Will driving with OBDII code P0345 on a 2002 Nissan Altima Sedan cause further damage to the vehicle?
- Continuing to drive with this code may lead to more severe engine performance issues and potential damage, so it's best to address the problem promptly.
7. Can I reset the OBDII code P0345 on my 2002 Nissan Altima Sedan without fixing the underlying issue?
- While you can clear the code with a scanner, it will likely return if the root cause, such as a faulty camshaft position sensor, is not addressed.
8. Is it safe to continue driving my 2002 Nissan Altima Sedan with the camshaft position sensor circuit bank 2 code P0345?
- It is not recommended to drive the vehicle with this code as it can lead to poor engine performance and potential safety hazards.
9. How much does it typically cost to replace the camshaft position sensor on a 2002 Nissan Altima Sedan?
- The cost of replacing the camshaft position sensor can vary, but it generally ranges from $100 to $200 for the part plus labor.
10. Can a DIY enthusiast replace the camshaft position sensor on a 2002 Nissan Altima Sedan?
- While it is possible to replace the camshaft position sensor yourself, it is recommended to have some mechanical experience and the right tools to do so safely and effectively.
Discuss the causes and fixes for P0345 2002 Nissan Altima Sedan OBDII Code
Code P0345 2002 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
