AutoCodes – Chevrolet – P0341 2018 Chevrolet Silverado

P0341 2018 Chevrolet Silverado Code - Camshaft Position Sensor Performance

Quick Answer

The Camshaft Position Sensor detects magnetic flux changes between the four narrow and wide tooth slots on the reluctor wheel. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0341 2018 Chevrolet Silverado indicates Camshaft Position Sensor Performance.
Common causes: Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,326

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 16, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0341 2018 Chevrolet Silverado Description

The Camshaft Position Sensor detects magnetic flux changes between the four narrow and wide tooth slots on the reluctor wheel. The Camshaft Position Sensor provides a digital ON/OFF DC voltage of varying frequency for each camshaft revolution. The Engine Control Module (ECM) will recognize the narrow and wide tooth patterns to identify the camshaft position, or which cylinder is in compression, and which is in the exhaust. The information is then used to determine the correct time and sequence for fuel injection and ignition spark events.
The ECM also has a dedicated replicated Camshaft Position Sensor signal output circuit that may be used as an input signal to other modules for monitoring engine RPM.
The Diagnostic Trouble Code (DTC) will be set when the ECM does not receive less than 4 pulses from the Camshaft Position Sensor during 2 engine revolutions.

OBDII Code P0341 2018 Chevrolet Silverado - Camshaft Position Sensor Performance - AutoCodes.com — P0341 2018 Chevrolet Silverado Code - Camshaft Position Sensor Performance

What does this mean?

What are the Possible Causes of the DTC P0341 2018 Chevrolet Silverado?

Faulty Camshaft Position Sensor
Camshaft Position Sensor harness is open or shorted
Camshaft Position Sensor circuit poor electrical connection
Faulty starter motor
Starting system circuit
Dead (Weak) battery

How to Fix the DTC P0341 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

On some Chevrolet models, the camshaft position sensor is part Ignition Control Module (ICM) (aka igniter).

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0341 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0341 2018 Chevrolet Silverado code?

Need more information on how to fix the P0341 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0341 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.