P0341 2017 GMC Sierra Code - Camshaft Position Sensor Performance
Quick Answer
The Camshaft Position Sensor detects magnetic flux changes between the four narrow and wide tooth slots on the reluctor wheel. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0341 2017 GMC Sierra indicates Camshaft Position Sensor Performance.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0341 2017 GMC Sierra Description
The ECM also has a dedicated replicated Camshaft Position Sensor signal output circuit that may be used as an input signal to other modules for monitoring engine RPM.
The Diagnostic Trouble Code (DTC) will be set when the ECM does not receive less than 4 pulses from the Camshaft Position Sensor during 2 engine revolutions.
What are the Possible Causes of the DTC P0341 2017 GMC Sierra?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0341 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0341 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0341 2017 GMC Sierra code?
Need more information on how to fix the P0341 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0341 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0341 2017 GMC Sierra Code
1. What does the OBDII code P0341 mean for a 2017 GMC Sierra?
P0341 indicates a problem with the camshaft position sensor’s performance, meaning the sensor signal is inconsistent or outside expected parameters.
2. What are common symptoms of code P0341 on a 2017 GMC Sierra?
Typical symptoms include rough idling, engine misfires, decreased fuel efficiency, difficulty starting the engine, or the check engine light turning on.
3. What causes the P0341 code on a 2017 GMC Sierra?
Potential causes include a faulty camshaft position sensor, damaged wiring or connectors, timing chain issues, or a malfunctioning crankshaft position sensor.
4. Can I drive my 2017 GMC Sierra with a P0341 code?
It’s not recommended to drive for extended periods with this code active, as it can lead to poor performance, engine damage, or unsafe driving conditions.
5. How do I fix the P0341 code on a 2017 GMC Sierra?
Repairs may involve replacing the camshaft position sensor, inspecting and repairing wiring or connectors, ensuring proper engine timing, or fixing related mechanical issues.
6. How can I test the camshaft position sensor on a 2017 GMC Sierra?
You can test the sensor using a multimeter to check for proper voltage and signal output or use an OBDII scanner to monitor live data.
7. Is a P0341 code related to timing issues on a 2017 GMC Sierra?
Yes, P0341 can indicate problems with engine timing, such as a worn timing chain or incorrect synchronization between the camshaft and crankshaft.
8. How much does it cost to repair a P0341 code on a 2017 GMC Sierra?
Repair costs vary but typically range from $150 to $400, depending on whether you need a camshaft sensor replacement, wiring repair, or timing chain work.
9. Can a weak battery cause a P0341 code on a 2017 GMC Sierra?
Yes, a weak or failing battery can disrupt sensor readings and lead to the P0341 code due to inadequate voltage supply.
10. Should I clear the P0341 code after repairs on my 2017 GMC Sierra?
Yes, after completing repairs, use an OBDII scanner to clear the code and verify that the issue is resolved by driving the vehicle and monitoring for recurrence.
Discuss the causes and fixes for P0341 2017 GMC Sierra OBDII Code
Code P0341 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
