P0341 2014 GMC Sierra Code - Camshaft Position Sensor Performance
Quick Answer
The Camshaft Position Sensor detects magnetic flux changes between the four narrow and wide tooth slots on the reluctor wheel. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0341 2014 GMC Sierra indicates Camshaft Position Sensor Performance.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0341 2014 GMC Sierra Description
The ECM also has a dedicated replicated Camshaft Position Sensor signal output circuit that may be used as an input signal to other modules for monitoring engine RPM.
The Diagnostic Trouble Code (DTC) will be set when the ECM does not receive less than 4 pulses from the Camshaft Position Sensor during 2 engine revolutions.
What are the Possible Causes of the DTC P0341 2014 GMC Sierra?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0341 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0341 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0341 2014 GMC Sierra code?
Need more information on how to fix the P0341 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0341 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0341 2014 GMC Sierra Code
1. What does the OBDII code P0341 mean on a 2014 GMC Sierra?
P0341 indicates a problem with the camshaft position sensor's performance, typically involving its signal being out of range or inconsistent with the crankshaft position sensor.
2. What are the common symptoms of the P0341 code on a 2014 GMC Sierra?
Symptoms may include difficulty starting, rough idling, reduced engine performance, stalling, and the Check Engine Light turning on.
3. What causes the P0341 code on a 2014 GMC Sierra?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors, timing chain or belt issues, or a malfunctioning PCM.
4. Can I drive my 2014 GMC Sierra with a P0341 code?
Driving with a P0341 code is not recommended as it can lead to poor performance, stalling, or further engine damage if the problem is not addressed.
5. How do I diagnose the P0341 code on a 2014 GMC Sierra?
Start by inspecting the camshaft position sensor and its wiring for damage or loose connections. Use a scan tool to check live data and compare camshaft and crankshaft sensor signals.
6. How do I fix the P0341 code on a 2014 GMC Sierra?
Repairs may involve replacing the camshaft position sensor, repairing damaged wiring, resetting the timing, or addressing issues with the crankshaft position sensor.
7. Can a bad camshaft position sensor cause a P0341 code?
Yes, a failing or faulty camshaft position sensor is one of the most common causes of the P0341 code.
8. Does the P0341 code on my 2014 GMC Sierra affect fuel efficiency?
Yes, a P0341 code can negatively impact fuel efficiency due to improper timing and engine performance issues.
9. How much does it cost to repair a P0341 code on a 2014 GMC Sierra?
Repair costs can vary, but replacing a camshaft position sensor typically costs between $100 and $300, including parts and labor.
10. Will clearing the P0341 code fix the issue permanently?
Clearing the code will only reset the Check Engine Light temporarily. The underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0341 2014 GMC Sierra OBDII Code
Code P0341 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
