P0340 2017 Honda CR-V Code - Camshaft Position Sensor 'A' No Signal
Quick Answer
The Camshaft Position (CMP) Sensor 'A' consists of a rotor and a semiconductor that detects rotor position and intake camshaft timing. Common causes include Faulty Camshaft Position (CMP) Sensor 'A', Camshaft Position Sensor 'A' harness is open or shorted, Camshaft Position Sensor 'A' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0340 2017 Honda CR-V indicates Camshaft Position Sensor 'A' No Signal.
- Common causes
- Common causes include Faulty Camshaft Position (CMP) Sensor 'A', Camshaft Position Sensor 'A' harness is open or shorted, Camshaft Position Sensor 'A' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0340 2017 Honda CR-V Description
What are the Possible Causes of the DTC P0340 2017 Honda CR-V?
- Faulty Camshaft Position (CMP) Sensor 'A'
- Camshaft Position Sensor 'A' harness is open or shorted
- Camshaft Position Sensor 'A' circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0340 2017 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0340 2017 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0340 2017 Honda CR-V code?
Need more information on how to fix the P0340 2017 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0340 2017 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0340 2017 Honda CR-V Code
1. What are the common symptoms of OBDII code P0340 in a 2017 Honda CR-V?
- Common symptoms include engine stalling, rough idling, poor acceleration, and difficulty starting the vehicle.
2. What does the OBDII code P0340 'Camshaft Position Sensor 'A' No Signal' mean for a 2017 Honda CR-V?
- This code indicates that the engine control module is not receiving a signal from the camshaft position sensor.
3. What are the possible causes of OBDII code P0340 in a 2017 Honda CR-V?
- The code can be triggered by a faulty camshaft position sensor, wiring issues, sensor alignment problems, or a malfunctioning ECM.
4. How can I diagnose the cause of OBDII code P0340 in my 2017 Honda CR-V?
- You can start by checking the wiring and connections to the camshaft position sensor, testing the sensor itself, and verifying proper alignment of the sensor.
5. Can a faulty camshaft position sensor cause OBDII code P0340 in a 2017 Honda CR-V?
- Yes, a faulty camshaft position sensor is one of the primary causes of OBDII code P0340 as it leads to a lack of signal being sent to the ECM.
6. What are some repair tips for addressing OBDII code P0340 in a 2017 Honda CR-V?
- Ensure the camshaft position sensor is properly aligned, check for any damaged wiring, replace the sensor if necessary, and clear the error code to see if the issue persists.
7. Is it safe to continue driving a 2017 Honda CR-V with OBDII code P0340?
- It is not recommended to drive the vehicle with this code unresolved as it can lead to further engine performance issues and potential breakdowns.
8. Can a DIY enthusiast fix OBDII code P0340 in a 2017 Honda CR-V?
- Depending on your skill level and access to tools, you may be able to address this code yourself by following diagnostic procedures and replacing the camshaft position sensor if needed.
9. How much does it typically cost to repair OBDII code P0340 in a 2017 Honda CR-V at a mechanic?
- The cost can vary depending on the labor rates and parts prices, but generally, repairing this code can range from $100 to $300 or more at a mechanic's shop.
10. Will resetting the error code resolve OBDII code P0340 in a 2017 Honda CR-V?
- Resetting the error code may temporarily turn off the check engine light, but if the underlying issue like a faulty camshaft position sensor is not addressed, the code is likely to reappear.
Discuss the causes and fixes for P0340 2017 Honda CR-V OBDII Code
Code P0340 2017 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
