P0340 2016 GMC Sierra Code - Camshaft Position Sensor Circuit
Quick Answer
The Camshaft Position Sensor detects magnetic flux changes between the four narrow and wide tooth slots on the reluctor wheel. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0340 2016 GMC Sierra indicates Camshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0340 2016 GMC Sierra Description
The ECM also has a dedicated replicated Camshaft Position Sensor signal output circuit that may be used as an input signal to other modules for monitoring engine RPM.
The Diagnostic Trouble Code (DTC) will be set when the ECM does not receive a signal from the Camshaft Position Sensor during 200 engine revolutions.
What are the Possible Causes of the DTC P0340 2016 GMC Sierra?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0340 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0340 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0340 2016 GMC Sierra code?
Need more information on how to fix the P0340 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0340 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0340 2016 GMC Sierra Code
1. What are common symptoms of OBDII code P0340 in a 2016 GMC Sierra?
Common symptoms include rough idling, engine stalling, poor acceleration, and difficulty starting the vehicle.
2. What does OBDII code P0340 indicate in a 2016 GMC Sierra?
OBDII code P0340 indicates a problem with the camshaft position sensor circuit in the vehicle.
3. What are some possible causes of OBDII code P0340 in a 2016 GMC Sierra?
Possible causes include a faulty camshaft position sensor, damaged wiring or connectors, timing belt issues, or a malfunctioning engine control module (ECM).
4. How can I diagnose the cause of OBDII code P0340 in my 2016 GMC Sierra?
Diagnosis involves using a scan tool to check for the code, inspecting the camshaft position sensor and its connections, testing the sensor's voltage, and checking the timing belt for proper alignment.
5. Can I still drive my 2016 GMC Sierra with OBDII code P0340?
It is not recommended to drive the vehicle with code P0340 as it can lead to further engine damage or safety issues. It's best to address the problem promptly.
6. How can I repair OBDII code P0340 in my 2016 GMC Sierra?
Repair options include replacing the camshaft position sensor, repairing or replacing damaged wiring, ensuring proper timing belt alignment, and resetting the ECM after repairs.
7. Is it necessary to clear the OBDII code P0340 after repairing the issue in a 2016 GMC Sierra?
Yes, it is important to clear the code using a scan tool after repairing the underlying issue to reset the ECM and ensure the problem has been resolved.
8. Can a DIY enthusiast fix OBDII code P0340 in a 2016 GMC Sierra?
Depending on their experience and tools available, a DIY enthusiast may be able to address the issue by following repair guides and being cautious when working on the vehicle's components.
9. How much does it typically cost to repair OBDII code P0340 in a 2016 GMC Sierra at a professional mechanic?
The cost of repairs for P0340 can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
10. How often does OBDII code P0340 occur in a 2016 GMC Sierra?
Code P0340 can occur intermittently or as a one-time issue, but it should be addressed promptly to prevent potential engine performance problems.
Discuss the causes and fixes for P0340 2016 GMC Sierra OBDII Code
Code P0340 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
