P0340 2003 Dodge Neon Code - Camshaft Position Sensor Circuit Bank 1 Sensor 1
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0340 2003 Dodge Neon indicates Camshaft Position Sensor Circuit Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0340 2003 Dodge Neon Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0340 2003 Dodge Neon?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0340 2003 Dodge Neon?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
1995 through 2003 Chrysler 2.0L - 2.4L engine cam sensor replacement. P0340 no start check engine light. 2003 Chrysler Neon 2.0L engine.
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0340 2003 Dodge Neon code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0340 2003 Dodge Neon code?
Need more information on how to fix the P0340 2003 Dodge Neon code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0340 2003 Dodge Neon code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0340 2003 Dodge Neon Code
1. What does OBDII code P0340 mean for a 2003 Dodge Neon?
This code indicates a problem with the Camshaft Position Sensor Circuit Bank 1 Sensor 1 in the vehicle.
2. What are the common symptoms of OBDII code P0340 in a 2003 Dodge Neon?
Common symptoms include engine stalling, rough idling, poor acceleration, and difficulty starting the vehicle.
3. What are some possible causes of OBDII code P0340 in a 2003 Dodge Neon?
Possible causes include a faulty camshaft position sensor, wiring issues, sensor alignment problems, or a malfunctioning timing belt.
4. How do I diagnose the issue related to OBDII code P0340 in my 2003 Dodge Neon?
Diagnose the issue by checking the camshaft position sensor for proper operation, inspecting the sensor wiring for damage, and ensuring the sensor is correctly aligned.
5. Can I still drive my 2003 Dodge Neon with OBDII code P0340?
It is not recommended to drive the vehicle with this code present, as it can lead to further engine damage and potential safety issues.
6. How can I repair OBDII code P0340 in my 2003 Dodge Neon?
Repair the issue by replacing the faulty camshaft position sensor, repairing any damaged wiring, and ensuring proper sensor alignment.
7. Are there any tips for preventing OBDII code P0340 in my 2003 Dodge Neon?
Regular maintenance, such as timely sensor replacements and checking the condition of the timing belt, can help prevent this code from appearing.
8. How much does it typically cost to repair OBDII code P0340 in a 2003 Dodge Neon?
The cost of repair can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Is it necessary to reset the OBDII code P0340 after repairing the issue in a 2003 Dodge Neon?
Yes, it is recommended to reset the code using an OBDII scanner after repairing the problem to clear the fault code from the system.
10. If OBDII code P0340 reappears after repair, what should I do for my 2003 Dodge Neon?
If the code reappears, recheck the camshaft position sensor, wiring, and alignment to ensure the repair was done correctly, and consider seeking professional help if needed.
Discuss the causes and fixes for P0340 2003 Dodge Neon OBDII Code
Code P0340 2003 Dodge Neon comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
