P0339 2010 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit Intermittent
Quick Answer
The Crankshaft Position (CKP) sensor system consists of a CKP sensor plate and a pickup coil. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0339 2010 Toyota Camry indicates Crankshaft Position Sensor 'A' Circuit Intermittent.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0339 2010 Toyota Camry Description
What are the Possible Causes of the DTC P0339 2010 Toyota Camry?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0339 2010 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0339 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0339 2010 Toyota Camry code?
Need more information on how to fix the P0339 2010 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0339 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0339 2010 Toyota Camry Code
1. What does code P0339 mean on a 2010 Toyota Camry?
Code P0339 indicates an intermittent issue in the crankshaft position sensor 'A' circuit, which may cause problems with engine timing or performance.
2. What are the symptoms of a P0339 code?
Symptoms include difficulty starting the engine, engine stalling, rough idling, poor acceleration, and the Check Engine Light turning on.
3. What causes the P0339 code on a Toyota Camry?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failing reluctor ring, or issues with the Engine Control Module (ECM).
4. Can I drive my 2010 Toyota Camry with a P0339 code?
Driving with a P0339 code is not recommended, as it can lead to engine stalling or other performance issues, potentially causing safety concerns.
5. How do I fix a P0339 code on a Toyota Camry?
Repairs may involve replacing the crankshaft position sensor, repairing damaged wiring or connectors, or addressing issues with the ECM.
6. How much does it cost to fix a P0339 code?
Repair costs can vary, but replacing the crankshaft position sensor typically costs between $150 and $300, including parts and labor.
7. Can a weak battery cause a P0339 code?
Yes, a weak or failing battery can cause voltage issues, leading to intermittent signals from the crankshaft position sensor and triggering a P0339 code.
8. How is P0339 diagnosed on a Toyota Camry?
A mechanic will use a scan tool to read the code, inspect the crankshaft position sensor, check the wiring and connectors, and test the ECM for faults.
9. What happens if I ignore the P0339 code?
Ignoring the code can result in worsening engine performance, frequent stalling, and potential damage to other engine components.
10. Can a P0339 code be caused by a timing issue?
Yes, improper timing or a damaged reluctor ring on the crankshaft can disrupt the sensor's readings and trigger a P0339 code.
Discuss the causes and fixes for P0339 2010 Toyota Camry OBDII Code
Code P0339 2010 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
