P0339 2010 Honda Accord Code - Crankshaft Position Sensor 'A' Circuit Intermittent
Quick Answer
The Crankshaft position sensor also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0339 2010 Honda Accord indicates Crankshaft Position Sensor 'A' Circuit Intermittent.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0339 2010 Honda Accord Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0339 2010 Honda Accord?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0339 2010 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0339 2010 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0339 2010 Honda Accord code?
Need more information on how to fix the P0339 2010 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0339 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0339 2010 Honda Accord Code
1. What are the common symptoms of OBDII code P0339 in a 2010 Honda Accord?
- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and decreased fuel efficiency.
2. What does the OBDII code P0339 in a 2010 Honda Accord indicate?
- This code signifies an intermittent issue with the Crankshaft Position Sensor 'A' circuit, which helps the engine control module monitor the crankshaft's position.
3. What are the possible causes of OBDII code P0339 in a 2010 Honda Accord?
- Potential causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, issues with the sensor's alignment, or a malfunctioning engine control module.
4. How can I diagnose the cause of OBDII code P0339 in my 2010 Honda Accord?
- Diagnosing this code typically involves visually inspecting the sensor and its wiring, checking for proper alignment, testing the sensor's resistance, and using a scan tool to monitor sensor data.
5. Can I continue driving my 2010 Honda Accord with OBDII code P0339?
- It's not recommended to drive the vehicle with this code present, as it can lead to potential engine performance issues and further damage if left unresolved.
6. How can I repair OBDII code P0339 in my 2010 Honda Accord?
- Repair options may include replacing the crankshaft position sensor, repairing or replacing damaged wiring or connectors, ensuring proper sensor alignment, or reprogramming the engine control module.
7. Will resetting the OBDII code P0339 in my 2010 Honda Accord make it go away permanently?
- Resetting the code without addressing the underlying issue will not fix the problem permanently; it's essential to diagnose and repair the root cause to prevent the code from reoccurring.
8. Can a DIY enthusiast fix OBDII code P0339 in a 2010 Honda Accord?
- Depending on their skill level and access to tools, a DIY enthusiast may be able to address this code by following repair guides, but professional assistance is recommended for accurate diagnosis and repair.
9. How much does it typically cost to repair OBDII code P0339 in a 2010 Honda Accord?
- Repair costs can vary based on the specific cause of the issue, but replacing the crankshaft position sensor or repairing wiring/connectors may range from $100 to $300, including parts and labor.
10. Are there any preventive maintenance tips to avoid OBDII code P0339 in a 2010 Honda Accord?
- Regularly inspecting and maintaining the crankshaft position sensor, ensuring proper sensor alignment during repairs, and addressing any engine performance issues promptly can help prevent the recurrence of this code.
Discuss the causes and fixes for P0339 2010 Honda Accord OBDII Code
Code P0339 2010 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
