P0338 Scion Code - Crankshaft Position Sensor 'A' Circuit High Input
Quick Answer
The Crankshaft position sensor also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0338 Scion indicates Crankshaft Position Sensor 'A' Circuit High Input.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0338 Scion Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0338 Scion?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0338 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0338 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0338 Scion code?
Need more information on how to fix the P0338 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0338 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0338 Scion Code
1. What are the common symptoms of OBDII code P0338 in a Scion related to the Crankshaft Position Sensor 'A' Circuit High Input?
The common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a noticeable decrease in fuel efficiency.
2. What are the possible causes of the OBDII code P0338 in a Scion indicating a high input in the Crankshaft Position Sensor 'A' circuit?
Possible causes can include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
3. How can I diagnose the Crankshaft Position Sensor 'A' Circuit High Input issue in my Scion when experiencing code P0338?
You can use a multimeter to test the resistance of the crankshaft position sensor, inspect the sensor wiring and connectors for any damage, and check for proper voltage signals from the sensor to the ECM.
4. Is it safe to drive my Scion with OBDII code P0338 related to the Crankshaft Position Sensor 'A' Circuit High Input?
It is not recommended to drive your vehicle with this issue as it may lead to further engine damage or sudden stalling, potentially putting you at risk on the road.
5. Can I repair the Crankshaft Position Sensor 'A' Circuit High Input problem in my Scion myself?
Depending on your skill level and access to tools, you may be able to replace the crankshaft position sensor, repair wiring issues, or reset the ECM yourself. However, professional diagnosis and repair are recommended for complex issues.
6. How much does it typically cost to repair OBDII code P0338 in a Scion caused by a high input in the Crankshaft Position Sensor 'A' circuit?
The cost can vary based on the specific cause of the issue, but it may range from $100 to $300 for parts and labor if a sensor replacement or wiring repair is needed.
7. Will resetting the OBDII code P0338 in my Scion make the issue go away permanently?
Simply resetting the code may temporarily clear the check engine light, but if the underlying problem causing the Crankshaft Position Sensor 'A' Circuit High Input is not addressed, the code is likely to reappear.
8. How important is the Crankshaft Position Sensor in a Scion, and what role does it play in the engine's operation?
The crankshaft position sensor is crucial for monitoring the position and speed of the crankshaft, providing essential data to the ECM to ensure proper fuel injection timing and ignition spark control.
9. Can extreme weather conditions or environmental factors trigger OBDII code P0338 in a Scion due to the Crankshaft Position Sensor 'A' Circuit High Input?
Extreme temperatures or moisture exposure can potentially affect the sensor's performance and lead to a high input signal, triggering the P0338 fault code.
10. Are there any preventive maintenance tips to avoid encountering OBDII code P0338 related to the Crankshaft Position Sensor 'A' Circuit High Input in my Scion?
Regularly inspecting and cleaning the sensor, ensuring proper wiring connections, and addressing any engine performance issues promptly can help prevent the occurrence of this code.
Discuss the causes and fixes for P0338 Scion OBDII Code
Code P0338 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
