AutoCodes – Chevrolet – P0336 2016 Chevrolet Silverado

P0336 2016 Chevrolet Silverado Code - Crankshaft Position Sensor Performance

Quick Answer

The crankshaft position sensor is an internally magnetic biased digital output integrated circuit sensing device. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0336 2016 Chevrolet Silverado indicates Crankshaft Position Sensor Performance.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 406

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0336 2016 Chevrolet Silverado Description

The crankshaft position sensor is an internally magnetic biased digital output integrated circuit sensing device. The sensor detects magnetic flux changes in the teeth and slots of the reluctor wheel on the crankshaft. The reluctor wheel is spaced at 60-tooth spacing, with two missing teeth for the reference gap. The reference gap is used to identify the crankshaft position at each start-up. The crankshaft position sensor produces an ON/OFF DC voltage of varying frequency, with 58 output pulses per crankshaft revolution. The crankshaft position sensor sends a digital signal to the ECM as each tooth on the reluctor wheel rotates past the crankshaft position sensor. The ECM uses each crankshaft position signal pulse to determine the crankshaft speed position. This information is then used to determine the optimum ignition and injection points of the engine. The ECM also uses crankshaft position sensor output information to determine the camshaft's relative position to the crankshaft, control camshaft phasing, and detect cylinder misfire.
The ECM also has a dedicated replicated crankshaft position sensor signal output circuit that may be used as an input signal to other modules for monitoring engine RPM.
The Diagnostic Trouble Code (DTC) will be set when the Crankshaft Position Sensor signal is not detected by the ECM during the first few seconds of engine cranking.

OBDII Code P0336 2016 Chevrolet Silverado - Crankshaft Position Sensor Performance - AutoCodes.com — P0336 2016 Chevrolet Silverado Code - Crankshaft Position Sensor Performance

What does this mean?

What are the Possible Causes of the DTC P0336 2016 Chevrolet Silverado?

Faulty Crankshaft Position Sensor
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)
Signal plate may be damaged
Dead or weak battery

How to Fix the DTC P0336 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0336 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0336 2016 Chevrolet Silverado code?

Need more information on how to fix the P0336 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0336 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0336 2016 Chevrolet Silverado Code

1. What does the OBDII code P0336 mean on a 2016 Chevrolet Silverado?

P0336 indicates a performance issue with the crankshaft position sensor, typically caused by an irregular signal from the sensor to the engine control module (ECM).

2. What are common symptoms of code P0336 in a 2016 Chevrolet Silverado?

Symptoms may include engine misfires, stalling, difficulty starting, poor acceleration, and an illuminated check engine light.

3. What causes a P0336 code on a 2016 Chevrolet Silverado?

Possible causes include a faulty crankshaft position sensor, damaged or frayed wiring, a misaligned or damaged reluctor ring, or issues with the ECM.

4. Can I drive my 2016 Chevrolet Silverado with a P0336 code?

Driving with a P0336 code is not recommended, as it may lead to poor engine performance, stalling, or further engine damage.

5. How do I diagnose a P0336 code on a 2016 Chevrolet Silverado?

Diagnose by inspecting the crankshaft position sensor, checking the wiring and connectors, testing the ECM, and ensuring the reluctor ring is not damaged or misaligned.

6. How do I fix a P0336 code on my 2016 Chevrolet Silverado?

Fixes may involve replacing the crankshaft position sensor, repairing damaged wiring, realigning or replacing the reluctor ring, or reprogramming the ECM.

7. How much does it cost to repair a P0336 code on a 2016 Chevrolet Silverado?

Repair costs vary but typically range from $150 to $300 for diagnosing and replacing the crankshaft position sensor, depending on labor rates and parts pricing.

8. Can a weak battery cause a P0336 code on a 2016 Chevrolet Silverado?

Yes, a weak or failing battery or charging system may cause voltage irregularities that can trigger a P0336 code.

9. How can I prevent a P0336 code on my 2016 Chevrolet Silverado?

Regular maintenance, such as inspecting and replacing worn components, checking wiring and connectors, and ensuring proper battery voltage, can help prevent this code.

10. Will clearing the code fix the P0336 issue on my 2016 Chevrolet Silverado?

Clearing the code will remove it temporarily, but the underlying issue must be resolved to prevent it from returning.