P0335 Suzuki Code - Crankshaft Position Sensor 'A' Circuit Malfunction
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 Suzuki indicates Crankshaft Position Sensor 'A' Circuit Malfunction.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 Suzuki Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 Suzuki?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 Suzuki?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 Suzuki code?
Need more information on how to fix the P0335 Suzuki code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 Suzuki code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 Suzuki Code
1. What are the common symptoms of OBDII code P0335 in a Suzuki related to the Crankshaft Position Sensor 'A' Circuit Malfunction?
- The common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.
2. What are the possible causes of the P0335 code in a Suzuki?
- The code can be triggered by a faulty crankshaft position sensor, damaged wiring or connectors in the circuit, or issues with the sensor's alignment or installation.
3. How does the crankshaft position sensor affect the vehicle's performance?
- The crankshaft position sensor plays a crucial role in providing the engine control module with accurate information about the crankshaft's position and speed, which is essential for ignition timing and fuel injection.
4. Can a DIY enthusiast repair the P0335 code in a Suzuki?
- While it is possible for experienced DIY enthusiasts to replace the crankshaft position sensor themselves, diagnosing the exact cause of the code may require professional diagnostic tools and expertise.
5. Is it safe to continue driving with the P0335 code present in a Suzuki?
- It is not recommended to drive the vehicle with the P0335 code active, as it can lead to further engine damage and potential safety hazards due to erratic engine behavior.
6. How can I prevent the P0335 code from reoccurring in my Suzuki?
- Regular maintenance, such as checking and cleaning the sensor connectors, ensuring proper sensor alignment during installation, and addressing any underlying engine issues promptly, can help prevent the code from reoccurring.
7. Are there any specific diagnostic steps recommended for troubleshooting the P0335 code in a Suzuki?
- Yes, diagnostic steps may include checking the sensor's wiring and connectors for damage, testing the sensor's resistance and output voltage, and verifying the sensor's alignment with the crankshaft.
8. Will resetting the fault codes make the P0335 code disappear permanently?
- Resetting the fault codes may temporarily clear the P0335 code, but if the underlying issue causing the code is not addressed, it is likely to reappear once the vehicle is driven again.
9. How much does it typically cost to repair the P0335 code in a Suzuki at a professional auto repair shop?
- The cost of repairing the P0335 code can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor, excluding diagnostic fees.
10. Can environmental factors or driving conditions trigger the P0335 code in a Suzuki?
- Extreme temperatures, exposure to excessive moisture, or rough driving conditions can potentially affect the performance of the crankshaft position sensor and contribute to the occurrence of the P0335 code.
Discuss the causes and fixes for P0335 Suzuki OBDII Code
Code P0335 Suzuki comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
