AutoCodes – Honda – P0335 2019 Honda CR-V

P0335 2019 Honda CR-V Code - Crankshaft Position Sensor No Signal

Quick Answer

The Crankshaft Position (CKP) Sensor detects injection/ignition timing for each cylinder and engine speed. Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0335 2019 Honda CR-V indicates Crankshaft Position Sensor No Signal.
Common causes: Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,434

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 17, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0335 2019 Honda CR-V Description

The Crankshaft Position (CKP) Sensor detects injection/ignition timing for each cylinder and engine speed. The CKP sensor consists of a rotor and a semiconductor that detects the rotor position. When the engine starts, the rotor turns, and the magnetic flux in the semiconductor device changes. The magnetic flux changes are converted into pulsing signals to the Powertrain Control Module (PCM). If no pulsing signals from the CKP sensor are detected, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0335 2019 Honda CR-V - Crankshaft Position Sensor No Signal - AutoCodes.com — P0335 2019 Honda CR-V Code - Crankshaft Position Sensor No Signal

What does this mean?

What are the Possible Causes of the DTC P0335 2019 Honda CR-V?

Faulty Crankshaft Position Sensor (CKP)
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0335 2019 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 2019 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 2019 Honda CR-V code?

Need more information on how to fix the P0335 2019 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2019 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2019 Honda CR-V Code

1. What does OBDII code P0335 mean on a 2019 Honda CR-V?

Code P0335 indicates a "Crankshaft Position Sensor No Signal," meaning the sensor is not sending the necessary signal to the engine control module (ECM).

2. What are the symptoms of a P0335 code on a 2019 Honda CR-V?

Common symptoms include difficulty starting the engine, stalling, rough idling, reduced engine performance, and an illuminated check engine light.

3. What causes the P0335 code on a 2019 Honda CR-V?

Potential causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failed reluctor ring, or a malfunctioning ECM.

4. Can I drive my 2019 Honda CR-V with a P0335 code?

Driving with a P0335 code is not recommended, as it can lead to stalling or engine failure, posing safety risks.

5. How do I fix a P0335 code on my 2019 Honda CR-V?

Inspect and replace the crankshaft position sensor if necessary, repair damaged wiring or connectors, and ensure the reluctor ring is intact and properly aligned.

6. Where is the crankshaft position sensor located on a 2019 Honda CR-V?

The crankshaft position sensor is typically located near the bottom of the engine, close to the crankshaft pulley or flywheel.

7. How much does it cost to repair a P0335 code on a 2019 Honda CR-V?

The repair cost varies but usually ranges from $150 to $300, including parts and labor, depending on the specific issue.

8. How can I diagnose a P0335 code on my 2019 Honda CR-V?

Use an OBDII scanner to confirm the code, then visually inspect the crankshaft position sensor, wiring, and connectors. Test the sensor with a multimeter if needed.

9. Can a dead battery cause the P0335 code on a 2019 Honda CR-V?

While unlikely, a weak or dead battery can sometimes affect electrical signals. However, the primary cause is usually related to the sensor or its wiring.

10. Will clearing the P0335 code fix the problem on my 2019 Honda CR-V?

Clearing the code will turn off the check engine light temporarily, but the issue will return unless the underlying problem is resolved.