P0335 2018 Honda CR-V Code - Crankshaft Position Sensor No Signal
Quick Answer
The Crankshaft Position (CKP) Sensor detects injection/ignition timing for each cylinder and engine speed. Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2018 Honda CR-V indicates Crankshaft Position Sensor No Signal.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2018 Honda CR-V Description
What are the Possible Causes of the DTC P0335 2018 Honda CR-V?
- Faulty Crankshaft Position Sensor (CKP)
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0335 2018 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2018 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2018 Honda CR-V code?
Need more information on how to fix the P0335 2018 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2018 Honda CR-V Code
1. What does the OBDII code P0335 mean on a 2018 Honda CR-V?
P0335 indicates a "Crankshaft Position Sensor No Signal," meaning the engine control module (ECM) is not receiving a proper signal from the crankshaft position sensor.
2. What are the common symptoms of a P0335 code on a 2018 Honda CR-V?
Symptoms may include difficulty starting, engine stalling, rough idling, poor acceleration, or the Check Engine Light being illuminated.
3. What causes the P0335 code to appear on a 2018 Honda CR-V?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, a broken timing belt or chain, or issues with the ECM.
4. How do I diagnose a P0335 code on my 2018 Honda CR-V?
Diagnosis involves inspecting the crankshaft position sensor and its wiring, testing the sensor with a multimeter, and checking for proper alignment in the timing system.
5. Can a bad crankshaft position sensor damage my 2018 Honda CR-V's engine?
While driving with a bad sensor won’t immediately destroy the engine, it can lead to misfires, stalling, and potential damage if ignored.
6. How much does it cost to fix a P0335 code on a 2018 Honda CR-V?
Repair costs vary but typically range from $150 to $300, including parts and labor, depending on whether the sensor or wiring needs replacement.
7. Can I drive my 2018 Honda CR-V with a P0335 code?
Driving with a P0335 code is not recommended, as it can cause stalling or leave you stranded if the sensor fails completely.
8. Where is the crankshaft position sensor located on a 2018 Honda CR-V?
The crankshaft position sensor is usually located near the bottom of the engine, close to the crankshaft pulley or flywheel.
9. What tools are needed to replace the crankshaft position sensor on a 2018 Honda CR-V?
You’ll typically need a socket set, a wrench, a multimeter, and possibly a scan tool to clear the code after repairs.
10. Will replacing the crankshaft position sensor clear the P0335 code on a 2018 Honda CR-V?
After replacing the sensor, you’ll need to use an OBDII scanner to clear the code. If the issue is resolved, the code should not return.
Discuss the causes and fixes for P0335 2018 Honda CR-V OBDII Code
Code P0335 2018 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
