AutoCodes – Honda – P0335 2017 Honda CR-V

P0335 2017 Honda CR-V Code - Crankshaft Position Sensor No Signal

Quick Answer

The Crankshaft Position (CKP) Sensor detects injection/ignition timing for each cylinder and engine speed. Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0335 2017 Honda CR-V indicates Crankshaft Position Sensor No Signal.
Common causes: Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 453

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 17, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0335 2017 Honda CR-V Description

The Crankshaft Position (CKP) Sensor detects injection/ignition timing for each cylinder and engine speed. The CKP sensor consists of a rotor and a semiconductor that detects the rotor position. When the engine starts, the rotor turns, and the magnetic flux in the semiconductor device changes. The magnetic flux changes are converted into pulsing signals to the Powertrain Control Module (PCM). If no pulsing signals from the CKP sensor are detected, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0335 2017 Honda CR-V - Crankshaft Position Sensor No Signal - AutoCodes.com — P0335 2017 Honda CR-V Code - Crankshaft Position Sensor No Signal

What does this mean?

What are the Possible Causes of the DTC P0335 2017 Honda CR-V?

Faulty Crankshaft Position Sensor (CKP)
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0335 2017 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 2017 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 2017 Honda CR-V code?

Need more information on how to fix the P0335 2017 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2017 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2017 Honda CR-V Code

1. What does the OBDII code P0335 mean on a 2017 Honda CR-V?

P0335 indicates a "Crankshaft Position Sensor No Signal," meaning the engine's computer is not receiving a signal from the crankshaft position sensor.

2. What are the symptoms of a P0335 code on a 2017 Honda CR-V?

Common symptoms include engine stalling, difficulty starting, reduced power, rough idling, or the engine not starting at all.

3. What causes the P0335 code to appear on a 2017 Honda CR-V?

Potential causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failed engine control module (ECM), or issues with the crankshaft reluctor ring.

4. How is the P0335 code diagnosed on a 2017 Honda CR-V?

A mechanic will typically use a scan tool to confirm the code, inspect the sensor and wiring, test the sensor's resistance, and verify the signal using an oscilloscope.

5. Can I drive my 2017 Honda CR-V with a P0335 code?

It's not recommended, as the engine may stall or fail to start, potentially leaving you stranded or causing safety risks.

6. How do I fix a P0335 code on my 2017 Honda CR-V?

Repairs may include replacing the crankshaft position sensor, repairing damaged wiring, or addressing issues with the crankshaft reluctor ring.

7. How much does it cost to fix a P0335 code on a 2017 Honda CR-V?

The cost to replace a crankshaft position sensor typically ranges from $150 to $300, depending on labor rates and part prices.

8. Can a dead battery cause a P0335 code on a 2017 Honda CR-V?

While unlikely, a weak or dead battery could cause electrical issues that might indirectly trigger the code. It's best to check the battery voltage.

9. Does the P0335 code always mean the sensor is bad on a 2017 Honda CR-V?

No, the issue could also be with the wiring, connectors, ECM, or crankshaft reluctor ring rather than the sensor itself.

10. How do I prevent a P0335 code on my 2017 Honda CR-V?

Regular maintenance, ensuring the crankshaft position sensor and wiring are in good condition, and addressing engine issues promptly can help prevent this code.