P0335 2016 Toyota RAV4 Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The Crankshaft Position Sensor system consists of a crank angle sensor plate and a pickup coil. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2016 Toyota RAV4 indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2016 Toyota RAV4 Description
The sensor plate has 34 teeth and is installed on the crankshaft. The pickup coil is made of wound copper wire, an iron core, and a magnet. The crank angle sensor plate rotates and, as each tooth passes by the pickup coil, a pulse signal is created. The pickup coil generates 34 signals per crankshaft revolution. Based on these signals, the Engine Control Module (ECM) calculates the crankshaft position and engine speed. Using these calculations, the fuel injection and ignition timing are controlled. If there is no signal from the crankshaft position sensor despite the crankshaft rotating, the ECM interprets this as a malfunction of the sensor and the Diagnostic Trouble Code (DTC) will be set.
What are the Possible Causes of the DTC P0335 2016 Toyota RAV4?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damaged
- Starter motor may be faulty
- Dead or weak battery
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0335 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2016 Toyota RAV4 code?
Need more information on how to fix the P0335 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2016 Toyota RAV4 Code
What does the OBDII code P0335 mean on a 2016 Toyota RAV4?
The P0335 code indicates a malfunction in the Crankshaft Position Sensor 'A' circuit, which monitors the position and rotational speed of the crankshaft.
What are the common symptoms of code P0335 on a 2016 Toyota RAV4?
Symptoms may include engine stalling, difficulty starting, reduced power, rough idling, or the engine failing to start altogether.
What causes the P0335 code to appear on a 2016 Toyota RAV4?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failed reluctor ring, or issues with the engine control module (ECM).
Can I drive my 2016 Toyota RAV4 with a P0335 code?
Driving with a P0335 code is not recommended as it can lead to stalling or further engine damage, which may compromise safety.
How do I diagnose the P0335 code on a 2016 Toyota RAV4?
Diagnosis involves inspecting the crankshaft position sensor, checking the wiring and connectors for damage, testing the sensor with a multimeter, and verifying the reluctor ring is intact.
How much does it cost to fix the P0335 code on a 2016 Toyota RAV4?
Repair costs vary but typically range from $150 to $300, depending on whether the crankshaft position sensor, wiring, or other components need replacement.
What tools are needed to repair a P0335 code on a 2016 Toyota RAV4?
You may need a multimeter, OBDII scanner, basic hand tools, and potentially a replacement crankshaft position sensor.
How do I replace the crankshaft position sensor on a 2016 Toyota RAV4?
Locate the sensor near the engine block, disconnect the wiring connector, remove the mounting bolt, replace the sensor, and reconnect the wiring.
Can a bad battery cause the P0335 code on a 2016 Toyota RAV4?
A weak or failing battery can sometimes cause electrical issues, but it is not a common cause of the P0335 code. A thorough diagnosis is recommended.
Will clearing the P0335 code fix the problem on a 2016 Toyota RAV4?
Clearing the code may temporarily remove the check engine light, but the underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for P0335 2016 Toyota RAV4 OBDII Code
Code P0335 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
