AutoCodesHonda – P0335 2016 Honda CR-V

P0335 2016 Honda CR-V Code - Crankshaft Position Sensor No Signal

Quick Answer

The Crankshaft Position (CKP) Sensor detects injection/ignition timing for each cylinder and engine speed. Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 2016 Honda CR-V indicates Crankshaft Position Sensor No Signal.
Common causes
Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 337
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 07, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0335 2016 Honda CR-V Description

The Crankshaft Position (CKP) Sensor detects injection/ignition timing for each cylinder and engine speed. The CKP sensor consists of a rotor and a semiconductor that detects the rotor position. When the engine starts, the rotor turns, and the magnetic flux in the semiconductor device changes. The magnetic flux changes are converted into pulsing signals to the Powertrain Control Module (PCM). If no pulsing signals from the CKP sensor are detected, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).
OBDII Code P0335 2016 Honda CR-V - Crankshaft Position Sensor No Signal - AutoCodes.com
P0335 2016 Honda CR-V Code - Crankshaft Position Sensor No Signal

What are the Possible Causes of the DTC P0335 2016 Honda CR-V?

  • Faulty Crankshaft Position Sensor (CKP)
  • Crankshaft Position Sensor harness is open or shorted
  • Crankshaft Position Sensor circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0335 2016 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 2016 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 2016 Honda CR-V code?

Need more information on how to fix the P0335 2016 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2016 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2016 Honda CR-V Code

1. What does the OBDII code P0335 mean on a 2016 Honda CR-V?

P0335 indicates that the Engine Control Module (ECM) is not receiving a signal from the crankshaft position sensor, which is critical for proper engine timing and performance.

2. What are the symptoms of a P0335 code in a 2016 Honda CR-V?

Common symptoms include difficulty starting the engine, engine stalling, rough idling, reduced power, poor fuel efficiency, and an illuminated check engine light.

3. What causes the P0335 code to appear on a 2016 Honda CR-V?

Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors, a broken timing belt or chain, or issues with the ECM.

4. Can I drive my 2016 Honda CR-V with a P0335 code?

While you may be able to drive the car, doing so can cause further engine damage or leave you stranded if the engine stalls. It's best to address the issue promptly.

5. How do I diagnose the P0335 code on a 2016 Honda CR-V?

Start by inspecting the crankshaft position sensor and its wiring for damage. Use a multimeter to test the sensor’s resistance and check for proper voltage at the connector.

6. How do I fix the P0335 code on a 2016 Honda CR-V?

Repairs may include replacing the crankshaft position sensor, repairing damaged wiring, securing loose connections, or in rare cases, replacing the ECM.

7. Where is the crankshaft position sensor located on a 2016 Honda CR-V?

The crankshaft position sensor is typically located near the bottom of the engine, close to the crankshaft pulley or flywheel.

8. How much does it cost to repair a P0335 code on a 2016 Honda CR-V?

Repair costs can vary but replacing the crankshaft position sensor typically ranges from $150 to $300, including parts and labor.

9. Can a dead battery cause a P0335 code in a 2016 Honda CR-V?

A weak or dead battery is unlikely to cause a P0335 code directly, but electrical issues related to the battery or alternator could potentially affect sensor signals.

10. Will clearing the P0335 code fix the issue in a 2016 Honda CR-V?

Clearing the code might temporarily turn off the check engine light, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P0335 2016 Honda CR-V OBDII Code

Code P0335 2016 Honda CR-V comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play