P0335 2013 Nissan Rogue Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2013 Nissan Rogue indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2013 Nissan Rogue Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2013 Nissan Rogue?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2013 Nissan Rogue code?
Need more information on how to fix the P0335 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2013 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0335 in a 2013 Nissan Rogue related to the Crankshaft Position Sensor Circuit?
- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and potential loss of power while driving.
2. What are the typical causes of OBDII code P0335 in a 2013 Nissan Rogue?
- The code P0335 in a 2013 Nissan Rogue is often caused by a faulty crankshaft position sensor, damaged wiring or connectors, or issues with the sensor's alignment.
3. How can I diagnose the OBDII code P0335 in my 2013 Nissan Rogue?
- Diagnosis typically involves using an OBDII scanner to read the code, checking the sensor's connections and wiring for any damage, and testing the sensor's functionality.
4. Is it safe to continue driving my 2013 Nissan Rogue with OBDII code P0335 related to the Crankshaft Position Sensor Circuit?
- It is not recommended to drive the vehicle with a faulty crankshaft position sensor, as it can lead to more serious engine problems and potential safety risks.
5. Can I replace the crankshaft position sensor in my 2013 Nissan Rogue myself?
- While it is possible to replace the crankshaft position sensor yourself, it is recommended to have a professional mechanic perform the task to ensure proper installation and calibration.
6. Are there any repair tips for fixing OBDII code P0335 in a 2013 Nissan Rogue?
- Ensure the engine is cool before working on the sensor, follow the manufacturer's guidelines for sensor replacement, and clear the trouble code after the repair is completed.
7. How much does it typically cost to repair OBDII code P0335 in a 2013 Nissan Rogue at a mechanic's shop?
- The cost of repairing OBDII code P0335 related to the Crankshaft Position Sensor Circuit in a 2013 Nissan Rogue can vary, but it generally ranges from $150 to $300, including parts and labor.
8. Can a faulty crankshaft position sensor cause other issues in my 2013 Nissan Rogue besides triggering OBDII code P0335?
- Yes, a faulty crankshaft position sensor can cause issues such as poor fuel economy, misfiring, and problems with the transmission shifting smoothly.
9. How long does it take to replace the crankshaft position sensor in a 2013 Nissan Rogue?
- The replacement of the crankshaft position sensor in a 2013 Nissan Rogue typically takes around 1-2 hours, depending on the accessibility of the sensor and any complications that may arise during the process.
Discuss the causes and fixes for P0335 2013 Nissan Rogue OBDII Code
Code P0335 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
