P0335 2011 Nissan Rogue Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2011 Nissan Rogue indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2011 Nissan Rogue Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2011 Nissan Rogue?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2011 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2011 Nissan Rogue code?
Need more information on how to fix the P0335 2011 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2011 Nissan Rogue Code
1. What are common symptoms of OBDII code P0335 in a 2011 Nissan Rogue?
The common symptoms of code P0335 in a 2011 Nissan Rogue include engine stalling, difficulty starting the engine, and rough idling.
2. What does OBDII code P0335 indicate in a 2011 Nissan Rogue?
Code P0335 in a 2011 Nissan Rogue indicates a problem with the crankshaft position sensor circuit.
3. What are the possible causes of OBDII code P0335 in a 2011 Nissan Rogue?
Possible causes of code P0335 in a 2011 Nissan Rogue include a faulty crankshaft position sensor, damaged wiring or connectors, or a problem with the sensor's alignment.
4. How can I diagnose OBDII code P0335 in my 2011 Nissan Rogue?
Diagnosing code P0335 in a 2011 Nissan Rogue involves checking the crankshaft position sensor's wiring, connectors, and alignment, as well as testing the sensor itself using a multimeter.
5. Can a faulty crankshaft position sensor cause OBDII code P0335 in a 2011 Nissan Rogue?
Yes, a faulty crankshaft position sensor is a common cause of code P0335 in a 2011 Nissan Rogue. It can lead to inaccurate readings and trigger the code.
6. How can I repair OBDII code P0335 in my 2011 Nissan Rogue?
Repairing code P0335 in a 2011 Nissan Rogue typically involves replacing the faulty crankshaft position sensor, repairing any damaged wiring or connectors, and ensuring proper sensor alignment.
7. Is it safe to continue driving with OBDII code P0335 in a 2011 Nissan Rogue?
It is not recommended to continue driving with code P0335 in a 2011 Nissan Rogue as it can lead to engine performance issues, stalling, and potential safety hazards on the road.
8. Can a DIY enthusiast fix OBDII code P0335 in a 2011 Nissan Rogue?
Yes, a DIY enthusiast with the necessary tools and knowledge can attempt to fix code P0335 in a 2011 Nissan Rogue by following repair guides and procedures.
9. How much does it cost to repair OBDII code P0335 in a 2011 Nissan Rogue at a mechanic?
The cost to repair code P0335 in a 2011 Nissan Rogue at a mechanic can vary depending on the exact cause of the issue, but it typically ranges from $150 to $300 for parts and labor.
10. Will resetting the OBDII code P0335 in a 2011 Nissan Rogue make it go away permanently?
Simply resetting the code P0335 in a 2011 Nissan Rogue will not permanently fix the issue. It is essential to diagnose and address the root cause of the problem to prevent the code from reappearing.
Discuss the causes and fixes for P0335 2011 Nissan Rogue OBDII Code
Code P0335 2011 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
