P0335 2010 Nissan Rogue Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2010 Nissan Rogue indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2010 Nissan Rogue Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2010 Nissan Rogue?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2010 Nissan Rogue code?
Need more information on how to fix the P0335 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2010 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0335 in a 2010 Nissan Rogue?
The common symptoms of code P0335 in a 2010 Nissan Rogue include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.
2. What does OBDII code P0335 indicate in a 2010 Nissan Rogue?
Code P0335 in a 2010 Nissan Rogue indicates a problem with the crankshaft position sensor circuit.
3. What are the possible causes of OBDII code P0335 in a 2010 Nissan Rogue?
Possible causes of code P0335 in a 2010 Nissan Rogue include a faulty crankshaft position sensor, damaged sensor wiring, poor electrical connections, or a problem with the sensor's tone ring.
4. How can I diagnose the issue related to OBDII code P0335 in my 2010 Nissan Rogue?
To diagnose code P0335 in a 2010 Nissan Rogue, you can use a scan tool to check for related trouble codes, visually inspect the sensor and wiring for damage, and perform electrical tests to determine the root cause.
5. Can a faulty crankshaft position sensor cause code P0335 in a 2010 Nissan Rogue?
Yes, a faulty crankshaft position sensor is a common cause of OBDII code P0335 in a 2010 Nissan Rogue, as the sensor is essential for providing accurate engine timing information.
6. What are the repair options for resolving OBDII code P0335 in a 2010 Nissan Rogue?
Repair options for code P0335 in a 2010 Nissan Rogue include replacing the faulty crankshaft position sensor, repairing damaged wiring, ensuring proper electrical connections, and resetting the trouble codes.
7. Is it safe to continue driving my 2010 Nissan Rogue with OBDII code P0335?
It is not recommended to drive your 2010 Nissan Rogue with code P0335, as the issue can lead to further engine problems, reduced performance, and potential safety hazards.
8. Can a DIY enthusiast fix OBDII code P0335 in a 2010 Nissan Rogue?
A DIY enthusiast with the necessary tools and skills can attempt to fix code P0335 in a 2010 Nissan Rogue by following proper diagnostic procedures and replacing the faulty components.
9. How important is the crankshaft position sensor in a 2010 Nissan Rogue?
The crankshaft position sensor is crucial in a 2010 Nissan Rogue as it helps the engine control unit determine the precise position of the crankshaft for optimal engine performance and timing.
10. Will resetting the trouble codes clear OBDII code P0335 in a 2010 Nissan Rogue?
Resetting the trouble codes may temporarily clear code P0335 in a 2010 Nissan Rogue, but if the underlying issue with the crankshaft position sensor circuit is not fixed, the code is likely to reappear.
Discuss the causes and fixes for P0335 2010 Nissan Rogue OBDII Code
Code P0335 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
