P0335 2010 Honda Accord Code - Crankshaft Position Sensor 'A' No Signal
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2010 Honda Accord indicates Crankshaft Position Sensor 'A' No Signal.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2010 Honda Accord Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2010 Honda Accord?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2010 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2010 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2010 Honda Accord code?
Need more information on how to fix the P0335 2010 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2010 Honda Accord Code
1. What are the common symptoms of OBDII code P0335 on a 2010 Honda Accord?
- Common symptoms include difficulty starting the engine, engine stalling, rough idling, and decreased fuel efficiency.
2. What does the OBDII code P0335 on a 2010 Honda Accord indicate?
- OBDII code P0335 indicates a malfunction in the crankshaft position sensor 'A', where no signal is being received by the vehicle's ECM.
3. What are the possible causes of OBDII code P0335 on a 2010 Honda Accord?
- The possible causes of P0335 can include a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or issues with the sensor's alignment.
4. How can I diagnose the cause of OBDII code P0335 on my 2010 Honda Accord?
- Diagnosing P0335 involves checking the sensor's wiring and connectors for damage, testing the sensor's resistance, and verifying the sensor's alignment with the crankshaft.
5. Can a faulty crankshaft position sensor cause engine damage in a 2010 Honda Accord?
- A faulty crankshaft position sensor can potentially cause engine damage if left unrepaired, as it affects ignition timing and fuel delivery, leading to performance issues and potential engine misfires.
6. How can I repair OBDII code P0335 on my 2010 Honda Accord?
- Repairing P0335 typically involves replacing the faulty crankshaft position sensor, ensuring proper alignment, and checking and repairing any damaged wiring or connectors associated with the sensor.
7. Is it safe to continue driving my 2010 Honda Accord with OBDII code P0335 present?
- It is not recommended to continue driving with P0335 present, as it can lead to engine performance issues, stalling, and potential long-term damage if left unresolved.
8. Can a DIY enthusiast replace the crankshaft position sensor on a 2010 Honda Accord?
- Replacing the crankshaft position sensor can be a DIY task for those with mechanical knowledge and the right tools. However, if unsure, it's best to consult a professional mechanic for proper installation.
9. What is the approximate cost to repair OBDII code P0335 on a 2010 Honda Accord?
- The cost to repair P0335 can vary depending on the labor rates and parts costs, but typically, replacing the crankshaft position sensor can range from $100 to $300, including parts and labor.
10. How long does it take to repair OBDII code P0335 on a 2010 Honda Accord?
- Repairing P0335 by replacing the crankshaft position sensor can usually be done within 1-2 hours, but additional diagnostic time may be needed to ensure proper sensor alignment and wiring integrity.
Discuss the causes and fixes for P0335 2010 Honda Accord OBDII Code
Code P0335 2010 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
