P0335 2009 Honda Accord Code - Crankshaft Position Sensor 'A' No Signal
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2009 Honda Accord indicates Crankshaft Position Sensor 'A' No Signal.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2009 Honda Accord Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2009 Honda Accord?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2009 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2009 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2009 Honda Accord code?
Need more information on how to fix the P0335 2009 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2009 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2009 Honda Accord Code
1. What are the common symptoms of OBDII code P0335 on a 2009 Honda Accord?
The common symptoms of OBDII code P0335 on a 2009 Honda Accord include engine stalling, rough idling, difficulty starting the engine, and poor acceleration.
2. What does the OBDII code P0335 mean on a 2009 Honda Accord?
OBDII code P0335 on a 2009 Honda Accord indicates a malfunction in the Crankshaft Position Sensor 'A', where no signal is being received from the sensor.
3. What are the possible causes of OBDII code P0335 on a 2009 Honda Accord?
Possible causes of OBDII code P0335 on a 2009 Honda Accord include a faulty crankshaft position sensor, wiring issues in the sensor circuit, or a damaged sensor connector.
4. How can I diagnose the Crankshaft Position Sensor 'A' No Signal issue on my 2009 Honda Accord?
To diagnose the Crankshaft Position Sensor 'A' No Signal issue on a 2009 Honda Accord, you can use a scan tool to check for OBDII codes, visually inspect the sensor and its wiring, and test the sensor's output using a multimeter.
5. Can I still drive my 2009 Honda Accord with OBDII code P0335?
It is not recommended to drive your 2009 Honda Accord with OBDII code P0335 for an extended period as it can lead to serious engine issues and potential safety hazards. It's best to address the problem promptly.
6. How can I repair OBDII code P0335 on my 2009 Honda Accord?
To repair OBDII code P0335 on a 2009 Honda Accord, you may need to replace the crankshaft position sensor, repair any damaged wiring or connectors, and clear the trouble codes using a scan tool.
7. Can a faulty battery cause OBDII code P0335 on a 2009 Honda Accord?
A faulty battery is not a direct cause of OBDII code P0335 on a 2009 Honda Accord. However, a weak or failing battery can sometimes affect the performance of the sensor and trigger related issues.
8. How much does it cost to fix OBDII code P0335 on a 2009 Honda Accord?
The cost to fix OBDII code P0335 on a 2009 Honda Accord can vary depending on the labor rates in your area, the cost of parts, and whether you choose to do the repair yourself or take it to a professional mechanic.
9. Will resetting the OBDII code P0335 on my 2009 Honda Accord make it go away permanently?
Resetting the OBDII code P0335 on a 2009 Honda Accord may temporarily clear the code, but if the underlying issue causing the code is not addressed, it is likely to return. It's important to diagnose and repair the root cause of the problem.
10. Is it safe to continue driving if I only experience intermittent issues related to OBDII code P0335 on my 2009 Honda Accord?
Even if the issues related to OBDII code P0335 on a 2009 Honda Accord are intermittent, it's still not safe to continue driving the vehicle without addressing the problem. Intermittent issues can worsen over time and potentially lead to more severe consequences.
Discuss the causes and fixes for P0335 2009 Honda Accord OBDII Code
Code P0335 2009 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
