AutoCodes – Nissan – P0335 2008 Nissan Rogue

P0335 2008 Nissan Rogue Code - Crankshaft Position Sensor Circuit

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0335 2008 Nissan Rogue indicates Crankshaft Position Sensor Circuit.
Common causes: Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,274

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0335 2008 Nissan Rogue Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Electronic Control Module(ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P0335 2008 Nissan Rogue - Crankshaft Position Sensor Circuit - AutoCodes.com — P0335 2008 Nissan Rogue Code - Crankshaft Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P0335 2008 Nissan Rogue?

Faulty crankshaft position sensor
Crankshaft position sensor harness is open or shorted
Crankshaft position sensor circuit poor electrical connection
Signal plate may be damage
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P0335 2008 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 2008 Nissan Rogue code?

Need more information on how to fix the P0335 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2008 Nissan Rogue Code

1. What does OBDII code P0335 on a 2008 Nissan Rogue indicate?

The P0335 code indicates a problem with the crankshaft position sensor circuit in the 2008 Nissan Rogue.

2. What are the common symptoms of a P0335 code in a 2008 Nissan Rogue?

Common symptoms of a P0335 code in a 2008 Nissan Rogue may include engine stalling, rough idling, difficulty starting the engine, and a loss of power.

3. What are the possible causes of a P0335 code in a 2008 Nissan Rogue?

Possible causes of a P0335 code in a 2008 Nissan Rogue include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the sensor's alignment.

4. How can I diagnose a P0335 code in my 2008 Nissan Rogue?

To diagnose a P0335 code in a 2008 Nissan Rogue, you can use a scan tool to read the code, visually inspect the sensor and its wiring for any damage, and perform a resistance test on the sensor.

5. How do I repair a P0335 code in a 2008 Nissan Rogue?

To repair a P0335 code in a 2008 Nissan Rogue, you may need to replace the crankshaft position sensor, repair any damaged wiring or connectors, and clear the code with a scan tool.

6. Can I drive my 2008 Nissan Rogue with a P0335 code?

It is not recommended to drive your 2008 Nissan Rogue with a P0335 code, as it can lead to further engine performance issues and potential stalling while driving.

7. How much does it cost to fix a P0335 code in a 2008 Nissan Rogue?

The cost to fix a P0335 code in a 2008 Nissan Rogue can vary depending on the cause of the issue, but it typically ranges from $100 to $300 for parts and labor.

8. Is the crankshaft position sensor easy to replace in a 2008 Nissan Rogue?

Replacing the crankshaft position sensor in a 2008 Nissan Rogue can vary in difficulty depending on the sensor's location, but it is generally considered a moderate DIY repair for experienced home mechanics.

9. Will a P0335 code cause my 2008 Nissan Rogue to fail emissions testing?

Yes, a P0335 code in a 2008 Nissan Rogue can cause the vehicle to fail emissions testing due to its impact on engine performance and emissions control systems.

10. How often should the crankshaft position sensor be replaced in a 2008 Nissan Rogue?

The crankshaft position sensor in a 2008 Nissan Rogue typically does not have a specific replacement interval unless it fails or shows signs of malfunction.