P0335 2008 Nissan Pathfinder Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2008 Nissan Pathfinder indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2008 Nissan Pathfinder Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2008 Nissan Pathfinder?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2008 Nissan Pathfinder?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2008 Nissan Pathfinder code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2008 Nissan Pathfinder code?
Need more information on how to fix the P0335 2008 Nissan Pathfinder code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2008 Nissan Pathfinder code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2008 Nissan Pathfinder Code
1. What are the common symptoms of OBDII code P0335 in a 2008 Nissan Pathfinder?
The common symptoms of OBDII code P0335 in a 2008 Nissan Pathfinder include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.
2. What can cause the OBDII code P0335 to trigger in a 2008 Nissan Pathfinder?
The most common cause of OBDII code P0335 in a 2008 Nissan Pathfinder is a faulty or malfunctioning crankshaft position sensor.
3. How does the crankshaft position sensor affect the engine performance in a 2008 Nissan Pathfinder?
The crankshaft position sensor monitors the position and speed of the crankshaft, providing crucial information to the engine control module. A malfunctioning sensor can disrupt ignition timing and fuel delivery, leading to poor engine performance.
4. What are the possible repair options for resolving OBDII code P0335 in a 2008 Nissan Pathfinder?
To resolve OBDII code P0335 in a 2008 Nissan Pathfinder, you may need to replace the crankshaft position sensor, inspect and repair any damaged wiring or connectors, and reset the fault code using an OBDII scanner.
5. Can a DIY enthusiast replace the crankshaft position sensor in a 2008 Nissan Pathfinder?
Yes, replacing the crankshaft position sensor in a 2008 Nissan Pathfinder is a task that can be completed by a DIY enthusiast with some automotive knowledge and the right tools. However, if you are unsure, it's recommended to consult a professional mechanic.
6. How important is it to address OBDII code P0335 promptly in a 2008 Nissan Pathfinder?
It is crucial to address OBDII code P0335 promptly in a 2008 Nissan Pathfinder to prevent potential engine damage, increased fuel consumption, and further drivability issues.
7. Are there any preventive maintenance steps to avoid encountering OBDII code P0335 in a 2008 Nissan Pathfinder?
Regularly inspecting and maintaining the crankshaft position sensor, as well as ensuring proper engine maintenance, can help prevent issues leading to OBDII code P0335 in a 2008 Nissan Pathfinder.
8. Can a fault in other engine components trigger OBDII code P0335 in a 2008 Nissan Pathfinder?
Yes, issues with related components such as the camshaft position sensor, timing belt, or engine control module can sometimes trigger OBDII code P0335 in a 2008 Nissan Pathfinder.
9. How can a driver safely continue to operate a 2008 Nissan Pathfinder with OBDII code P0335 until it can be repaired?
If you experience OBDII code P0335 in a 2008 Nissan Pathfinder, it is advisable to drive cautiously and avoid heavy acceleration or high speeds until the issue is resolved to prevent further damage to the engine.
10. Is it necessary to clear the OBDII code P0335 after repairing the issue in a 2008 Nissan Pathfinder?
After repairing the issue causing OBDII code P0335 in a 2008 Nissan Pathfinder, it is essential to clear the fault code using an OBDII scanner to reset the vehicle's engine control module and ensure proper functionality.
Discuss the causes and fixes for P0335 2008 Nissan Pathfinder OBDII Code
Code P0335 2008 Nissan Pathfinder comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
